Specification Sheet

ShenZhen HiFiber Co.,Ltd
Optical Transmission Network Solution Provider www.hfiber.com
E-mail:[e-mail] Tel: [phone]
5
Power Indicator Light – “ON” means normal operation of DC 5V power supply adaptor.
c. 1000M Indicator Light
“ON” means the rate of the electric port is 1000 Mbps, while “OFF” means the rate is 100
Mbps.
d. LINK/ACT (FP)
“ON” means connectivity of the optical channel; “FLASH” means data transfer in the
channel; “OFF” means non-connectivity of the optical channel.
e. LINK/ACT (TP)
“ON” means connectivity of the electric circuit; “FLASH” means data transfer in the circuit;
“OFF” means non-connectivity of the electric circuit.
f. SD Indicator Light
“ON” means input of optical signal; “OFF” means non input.
g. FDX/COL:
“ON” means full duplex electric port; “OFF” means half-duplex electric port.
h. UTP
Non-shielded twisted pair port;
Instructions on Rear Panel
There is only a DC 5V external power port on the rear panel: