P51b Instruction Manual

IMPORTANT:

Please do not clean your model with pure alcohol, only use liquid soap with water or use glass cleaner

to clean the surface of your model.

Decal

All details are subject to

change without notice !

29- DECALS

1- Cut out the decals and apply them to the positions shown.

2- Do not peel the backing paper off all at once. Peel off one corner of

the backing and remove with scissors.

3- Place the decal in the correct position on the model and when

with this position firmly press the corner without backing

into place.

4- Then carefully peel back the rest of the backing while at the same time

pressing the rest of the decal into place with your finger.

5- If you are unfortunate enough to get an air bubble then prick the

center of the bubble only with a pin or point of a craft knife and

carefully push the air out.

6- With any curves carefully stretch the decal and apply a little heat so

that no creases occur, cut off any excess that may occur.

“Fuel Cap” Decal

Decal

VQA06BEX “Berlin Express””

Decal

DECAL P-51B “BERLIN EXPRESS”

P-51B “BERLIN EXPRESS” - VQ MODELS