P51b Instruction Manual

Plastic air scoop

Plastic fairing

6x40 plastic bolt

Wing bolt mount

(Plywood)

Plastic M6 insert

WING

BOTTOM

Nylon wing bolt

BOTTOM VIEW

14- INSTALLATION OF THE WING (1)

15- INSTALLATION OF THE WING (2)

Cut away the covering inside the line before

installing the air scoop and wing cover

Plastic air scoop

Wing fairing

1- Using the ABS air scoop as a template, draw around the outside edge with a pencil and then remove it.

2- Using a sharp hobby knife cut away the covering just inside the line, please do not cut into the wood.

3- Glue the ABS air scoop into position using CA adhesive.

4- Repeat the above steps for the ABS wing fairing.

12mm

15/32”

6x40mm nylon bolt

.........2

BOTTOM VIEW

AIR SCOOP

Front of wing locator