User Manual

ManualsBrandsH-King ManualsAircraftEZIO 1500mm EP Glider (PNP)

SHEN ZHEN FLYCOLOR ELECTRONIC CO.,LTD

Add:NO.38 Liuxian3 Road Baoan Shenzhen China

Tel: 0755-86321853 Fax: 0755-86321853-817

The instruction book of bushless ESC for aircraft

Dear user,

Thanks for using the brushless motor intelligent power electronic speed controller(ESC) which designed and

manufactured by Shenzhen FLYCOLOR electronic Co.,Ltd..Because of big power when you switch on this

product.Improper use or operation may cause personal injury and equipment damage.We strongly suggest customer

read the user manual carefully before using it and operate it according to the manual strictly. We don’t assume any

liability arising from the use of this product,including but not limited to incidental damages or consequential damages

liability.Meanwhile,we don’t assume any responsibility of the use of unauthorized removable and modify any liability

arising from this product and caused by third-party products.

We have the right to change the products without notice, including appearance, performance parameters,and use

requirements;we do not make any guarantee, statement or promise for if the product is suitable for the user’s particular

purpose.

1. Features of brushless motor ESC

●Using powerful, high performance MCU processor, user can set up their own function according to their demand,

Fully reflect the unique intelligence characteristics of our products.

●Have smooth and delicate feel of controlling speed, first-class speed control linear. Automatic correction of the

throttle end and take the maximum of the throttle trip.

●Support unlimited highest speed of brushless motor.

●Support constant speed.

●Elaborate circuit design,super anti-jamming.

●Start way can be set up,throttle respond quickly,and has the very smooth speed control linear,compatible with fixed

wing aircraft and helicopter.

●Low voltage protective value can be set.

●Built-in SBEC, big load power,small power consumption with steering gear

●With multiple self-protection function: input abnormal voltage ,/battery low voltage,over thermal, throttle signal loss

drop power

●Good performance of energization safety,when switching on the power, motor won’t started immediately wherever

the throttle levers of RC is in.

●Over-thermal protection: when ESC work temperature reached 100 ℃,the output power will be half reduced , when

lower than 100 ℃ , the output power recover automatically .

●Compatible with all the remote control operation setting and support program card settings

●Set alarm sound to judge the work situation after switching on.

●Our company has complete product intellectual property, the products upgrade and update sustainable. And

customize according to customer's requirements .

2.Specifications of ESC

Summary of content (11 pages)

PAGE 1
SHEN ZHEN FLYCOLOR ELECTRONIC CO.,LTD The instruction book of bushless ESC for aircraft Dear user, Thanks for using the brushless motor intelligent power electronic speed controller(ESC) which designed and manufactured by Shenzhen FLYCOLOR electronic Co.,Ltd..Because of big power when you switch on this product.Improper use or operation may cause personal injury and equipment damage.We strongly suggest customer read the user manual carefully before using it and operate it according to the manual strictly.
PAGE 2
SHEN ZHEN FLYCOLOR ELECTRONIC CO.,LTD specification Continuous current(A) the Max burst curre nt (10s) A BEC output (V/A) BEC Mode Cells of battery Li-XX FLY-10A 10A 12A 5V/3A-1A SBEC/ UBEC 2-4Lipo 5-12NC 60*26*9 26 FLY-20A 20A 25A 5.5V/3A-1A SBEC/ UBEC 2-4Lipo 5-12NC 54*26*11 30 FLY-30A 30A 40A 5.5V/3A-1A SBEC/ UBEC 2-4Lipo 5-12NC 54*26*11 32 FLY-40A 40A 60A 5.5V/4A SBEC 2-5Lipo 5-15NC 35*71*10.5 48 FLY-50A 50A 80A 5.
PAGE 3
SHEN ZHEN FLYCOLOR ELECTRONIC CO.,LTD 6． Acceleration startup setting( apply in the precise gear box and helicopter specifically) 7． Helicopter mode(apply in helicopter specifically) 8． Steering of motor(clockwise or anticlockwise) 9． Working frequency setting 10．Over low-voltage mode( reduce power or stop immediately) 5. RC programming card set procedures of brushless motor ESC Push the throttle lever to the highest ,ESC enter into the setting mode, then switch on the power of RC.
PAGE 4
SHEN ZHEN FLYCOLOR ELECTRONIC CO.
PAGE 5
SHEN ZHEN FLYCOLOR ELECTRONIC CO.,LTD 6．Sequence and explanation of the programming cycle Menu ●start the remote control→throttle hit the highest point→contact the battery to the ESC→wait for 2S→enter the programming when entering the programming setting,you will hear the following tweet sounds,it will cycle tweet according to the following chart,after tweet a tone, hit the throttle to the minimum within four times chirping, then Confirm and save this set item.
PAGE 6
SHEN ZHEN FLYCOLOR ELECTRONIC CO.
PAGE 7
SHEN ZHEN FLYCOLOR ELECTRONIC CO.,LTD to repeat this procedure. Note: when using the ESC,before connect the battery pack,be careful check all plugs to make sure the connect are with correct polarity, and is firmly installed, to prevent the ESC be damaged by wrong connection polarity or short circuit. 1.
PAGE 8
SHEN ZHEN FLYCOLOR ELECTRONIC CO.,LTD 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. receiver device is set up correctly,please do not Install the propeller or drive pinion on the motor. Do not use cracked or punctured battery pack Do not use the battery pack which is easy to overheating. Do not use short-circuit battery. Do not use non-standard cable insulation materials. Do not use a non-standard cable connector.
PAGE 9
SHEN ZHEN FLYCOLOR ELECTRONIC CO.,LTD 11. Processing method for common problems.
PAGE 10
SHEN ZHEN FLYCOLOR ELECTRONIC CO.,LTD work, but issued a sound of the alarm tone (a sound of "beep" then a short pause) channel of the receiver and the signal line is connected correctly Check the transmitter and receiver to confirm the signal output when powered on, motor does not work, issue a continuous alarm tone.
PAGE 11
SHEN ZHEN FLYCOLOR ELECTRONIC CO.,LTD should replace the flying field wiring Poor contact Check to confirm if the plug of battery pack output cable is connected reliably with motor cable Add:NO.