User's Manual

Wave12(1205/1210)
User Manual
Hand Gesture Controller
Bluetooth Connection & Wireless Charging
Version 1.0
Introducing HPB Wave12
Product Specifications
 Detection distance: 5~10 cm (from cover glass)
 Detection angle: 42 degrees (from center of sensor)
 BLE connection distance: Max. 6m
 Power Input micro USB:
Wave1205 DC5V 1.7A;
Wave1210 DC9V 2.1A
(suggest use cigarette lighter receptacle with USB Type A
connector)
 Cradle size (W/H/D): 129.1mm/105.8mm/74.4mm;
Adjustable width: Min. 66.3mm, Max. 91.5mm;
Adjustable height:18.6mm;
 Wireless Charging Power:
Wave 1205 : Output Power - 5W
Wave 1210 : Output Power - 10W
 Blue Tooth Frequency : 2.4GHz
 Range of Working Temperature 0~40°C
 Caution : The rated output current of power adapter shall be
as below
Wave 1205:5V/1.7A Wave 1210:9V/2.1A
Package Contents
 HPB Wave12  Micro USB cable
 User manual  Car air vent clip
Disclaimer
The function to hang up phone by using hand gestures is not
compatible with iPhone.
Install your Wave12
Phone Placement for Wireless Charging
Light Indication Guide
The light indications are shown on the motion sensor panel on the
left of the Wave12 device.
Vertical Adjustment Guide
The vertical adjustment tab is located on the back of the
Wave12. Gently push on the tab to slide the vertical
adjustment up and down. Once the desired position is found,
release the tab to set the position. There are 7 different
adjustable positions (drawing as below).
For iPhone (No APP is needed)
*Support iOS 10.0 and above
Car Audio Routing Setting
To set up your phone, go to
SettingsGeneralAccessibilityCall Audio Routing, select
"Bluetooth Headset".
Bluetooth Pairing
1. Go to Settings of your iPhone and turn on Bluetooth. iOS
system will scan devices automatically. At "Other
devices" you may find several Bluetooth devices, select
"Wave12-xxxx".
2. System will pop out a pair request dialog box and
choose "Pair". Wave12 will be paired and connected.
Blue LED will be on.
3. Please double check the Bluetooth, "Wave12-xxxx" is
connected in your "My Devices" list.
For Android Phone (Please download APP
*Support Android 6.0 and above
Install APP & Related Settings
Scan the QR code below or go to your "Play Store" for
"HPB Wave" APP installation.
1. Upon completion, click "Yes" to turn on Bluetooth.
2. In the "SettingsSound & NotificationNotification
access", select "hpb wave".
3. In the "SettingsAccessibility", turn hpb wave to "ON".
“HPB WAVE” before using)
Bluetooth Pairing
Start hpb wave APP. Click on "Connection Setting" to
search for available device "Wave12-xxxx" and select it.
More functions on hpb wave App:
 Unpair: To remove the device, click "unpair".
 Search Connection: Click to search available device nearby.
If yes, you will see "Wave12-xxxx is connected!".
 Audio Output: There are options for your choice.
"Mobile Phone": audio out from your mobile phone
"Mobile Speakerphone (voice only)": audio out from your
mobile
phone speaker
"Other devices": It will go to phone system to allow you to
00connect your target BT devices.
Operation instructions
Wave hand in front of the motion sensor from position 1 to 2
0.5~1 second
Operation instructions
Wave hand in front of the motion sensor from position 1 to 2
within 0.5~1 second
Operation instructions
Wave hand in front of the motion sensor from position 1 to
2 within 0.5~1 second
Hereby
，
HPB HI-TECH CORP. declares that the radio equipment type [Wave 12 designation
of type of RE] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address: 10F., No.308 Sec. 1, Neihu Rd, Taipei,
Taiwan, R.O.C.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Warranty Card
Maintenance & Service
H.P.B. Hi-Tech Corp.
10F., No.308 Sec. 1, Neihu Rd, Taipei, Taiwan, R.O.C. Tel: [phone]
Customer Service Hotline: [phone] Email: [e-mail]
This Limited Warranty is certified that HPB HI-TECH CORP. is guaranteed for free
repairs up to 12 months from the date of purchase against assembly /
manufacturing faults.
This warranty does not cover defects resulting from improper or unreasonable
use or maintenance; failure to follow operating instructions; accident; excess
moisture; insects; lightning; power surges; connections to improper voltage
supply; unauthorized alteration or modification of original condition; damages
caused by inadequate packing or shipping procedures; loss of, damage t or
corruption of stored data; product that requires modification or adaptation to
enable it to operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of products
damaged by these modifications; and products purchased from unauthorized
dealers.
This warranty period id effective from 30 days after manufacture month if the
warranty card is illegible, removed, altered or damaged.
HPB or HPB authorized distributor will provide quotation to consumer first for any
service demand exceed warranty period. Service demand will conduct after
received consumer agreement.
Seal:
Date of Purchase:
0.5~1 sec
0.5~1 sec
0.5~1 sec
0.5~1 sec
Wave Right
Next Song
Wave Left
Previous
S
ong
0.5~1 sec
0.5~1 sec
5-10 cm
5-10 cm
Wave Up
Answer phone call
Play / Pause
music
Wave Down
Hang Up or
Deny phone call
Volume Down
Volume Up
Clockwise
Counter
Clockwise
For Android user : if you connected or used several
Bluetooth speakers, you must choose one of them。
This device is designed to work with your Smart phone
and Bluetooth car stereo or Bluetooth speakers.
Please check the connection before use. The function
to hang up phone using hand gestures is not
compatible with iPhone.
Attention
Slide towards G for smaller phone sizes
Vertical Adjustment Tab
Slide towards A for larger phone size
Bluetooth indicator (off): No phone connected
Bluetooth indicator (on): Phone is connected
Green battery indicator (on): Standby mode
Red battery indicator (on): Phone charging
Red battery indicator (blinking): Obstruction &
Over current
Side arms
Bottom hook
1.Locate the
“T” shaped
end of the clip
2. Match the “T”
shape end with
the opening on
the back of the
mount
3. Slide the
clip in until an
audible click is
heard
4. Fix the
Wave12 on a
suitable location
5. Connect the cable to the micro USB
input located on the back of the Wave12
6. Plug into the car using USB outlet or
via a cigarette lighter with USB Type A
connector
(Cigarette lighter is not standard
accessory)
Side arms
Position the center of the
phone with the wireless
charging sensor of the
Wave12. Lock the phone in
position by adjusting the side
arms and bottom hook.
Bluetooth indicator
Motion sensor and
LED indicators
Wireless charging
indicator
Car air vent clip
Micro USB input
Vertical
adjustment tab