User Manual

103
2. To add a disk, click Add. In the dialog box displayed, select disk usage
(recording/snapshot or backup) and disk type (currently NAS only),
enter the server address and directory, and then click Add. Up to
eight NAS disks are allowed.
3. To edit disk property, click , and then modify disk usage
(recording/snapshot or backup) and disk property (Read/Write,
Read Only or Redundant) as needed.
NOTE!
 Disk property can be edited if the disk is used for recording/snapshot.
 The Redundant property is available to certain NVR models.
 You may use external eSATA disks for recording/snapshot or backup
purpose and unmount them if necessary. eSATA disks and NAS disks
cannot be used to create arrays.
4. To format a disk, select the disk and then click Format. A
confirmation message appears. Click Yes.