User Manual

119
1. Click System > Security > Password Mode.
2. Friendly password is enabled by default. You may enable Enhanced
Password as needed.
 Friendly Password
If this option is selected, a strong password must be used except when
login from the same network segment or one of the three private network
segments (10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/24).
 Enhanced Password
If this option is selected, a prompt for a strong password will appear when
a weak password is detected. Also, only strong passwords are allowed for
new users.
NOTE!
Only admin can configure secure password.
3. Click Apply to save the settings.
Hot Spare Configuration
Only certain NVR models support this function.
With hot spare configured, when the working device fails, the hot spare
takes over service of the working data. When the working device restores
normal status, it takes over service from the hot spare, and data saved to
the hot spare during the period of failure is transferred back to the
working device to ensure reliable and consistent data storage.
1. Click System > Hot Spare.
2. Select a working mode, Normal (default mode) for working device,
or Hot Spare for hot spare device.