Manualshelf

User Manual

ManualsBrandsH. VIEW ManualsElectronicsH.VIEW 8CH PoE NVR Network Video Recorder, 8-Channels, Supports 8 x 6MP IP Cameras, HDD Not Included (Supports up to 6TB Hard Drive)
51525354555657585960
48
2. Set a snapshot schedule under Storage > Snapshot. For the detailed
steps, see Draw or Edit a Schedule. Make sure the schedule type is
Motion.
Alarm Triggered Recording and Snapshot
Set input alarms to trigger recording and snapshot. See Alarm Input and
Output for more details.
Alarm Triggered Recording
1. Click Alarm > Input/Output > Alarm Input.
2. Set alarm input: click for the desired camera. In the window
displayed, select Enable, select N.O. (normally open) or N.C.
(normally closed) trigger mode, and then click OK.
NOTE!
To apply the same settings to other camera(s), click Copy and then select
the desired camera(s).
3. Set alarm triggered recording: click under Trigger Actions. In the
window displayed, click the Recording tab, select the desired
camera, and then click OK.
4. Set a schedule under Storage > Recording. For the detailed steps,
see Draw or Edit a Schedule. Make sure the schedule type is Alarm.