User Manual
85
3. Click Backup to export the counting statistics to a storage device.
11 Network Configuration
Network configuration is required if your NVR operates in a network.
NOTE!
The default IP address is 192.168.1.30 for NIC 1 and 192.168.2.30 for NIC
2, and likewise.
Basic Configuration
TCP/IP
1. Click Network > Basic.
2. Set the network parameters as needed. DHCP is enabled by default.
You can choose a working mode if your NVR has two NICs:
Multi-address mode: The two NICs work independently and can be
configured separately. Either NIC can be chosen as the default route,
and data will be forwarded through this NIC when the NVR connects
to the extranet.