Manualshelf

User Manual

ManualsBrandsH. VIEW ManualsElectronicsH.VIEW 8 Channels 4K POE NVR Recorder 8MP Onvif Video Recorder, Support 8x8MP/4K IP Security Cameras, Max up to 10TB Hard Drive(Not Included)
31323334353637383940
24
b. On the NVR: Select a protocol, enter the domain name
mentioned above, enter the username and password. The port is the
external port of the IP device.
c. Click OK.
NOTE!
If Custom is selected for Protocol, the port is the mapped external
RTSP port of the IP device.
Do not add an IP device to an NVR using different methods (e.g., IP
and MyDDNS) at the same time.
When an IP device is added by MyDDNS, domain name (NO-IP or
DynDNS), or IP (public IP+public port) and it is not connected to the
same router as the NVR, alarm is configurable, but alarm push is not
available.
Option 5
Use this option only when the IP device to add supports the standard RTSP,
and all you need from the IP device are just view live and playback. IP
devices added in this way cannot be configured from the NVR.
1. Click Camera > Camera.
2. Click Custom Add.
3. Click to select a camera in the list, select Custom from the Protocol
drop-down list, and then click the Protocol button.