User Manual

39
NOTE!
Presets can also be triggered by alarms. See Alarm-Triggered Actions for
details.
Setting a Preset Patrol
Set the PTZ camera to patrol by presets (go from one preset to the next
in specified order). You need to set presets first and then select some as
keypoints. Up to four patrol routes (Preset Patrol 1, 2, 3 and 4) are allowed
for each PTZ camera, and each patrol route can have up to eight presets
(keypoints). After setting presets, follow the steps to set a preset patrol.
The following takes preset patrol 1 as an example.
1. In the PTZ Management window, click . A window is displayed as
follows.
2. Select a preset from the drop-down list, set the duration (time the
camera stays at the preset, unit: second), and then set the rotation
speed (1: slowest, 9: fastest). Click OK to save the settings. The
preset is added as a keypoint.
3. Repeat the above steps to add all presets (keypoints), and adjust the
sequence of these presets by clicking or
. Modify or delete a preset by clicking or .
Clicking will delete all the added keypoints.