Manualshelf

User Manual

ManualsBrandsH. VIEW ManualsElectronicsH.VIEW 8 Channels 4K POE NVR Recorder 8MP Onvif Video Recorder, Support 8x8MP/4K IP Security Cameras, Max up to 10TB Hard Drive(Not Included)
51525354555657585960
44
4. Click Apply to save the settings.
Snapshot
Set resolution, image quality and snapshot interval for snapshots taken
according to schedule or triggered by an event.
1. Click Camera > Snapshot.
2. Set the parameters as needed.
NOTE!
Scheduled snapshot uses the Normal type of schedule. Event-
triggered snapshot is triggered by an event such as an alarm input
and a motion detection alarm. Settings effective to event-triggered
snapshot also apply to manual snapshot.
Snapshot interval is the length of time between two snapshots.
3. Click Apply to save the settings.
Draw or Edit a Schedule
Make a recording or snapshot schedule by drawing (pressing and dragging)
or by editing (using the Edit button). The operations for recording and
snapshot are similar, so this section only describes how to make a
recording schedule.
1. Click Storage > Recording.
2. Select the camera from the list. Schedule is enabled by default. If it
is disabled, select to enable it.
3. Set Pre-Record and Post-Record as needed.