Manualshelf

User Manual

ManualsBrandsH. VIEW ManualsElectronicsH.VIEW 8 Channels 4K POE NVR Recorder 8MP Onvif Video Recorder, Support 8x8MP/4K IP Security Cameras, Max up to 10TB Hard Drive(Not Included)
51525354555657585960
49
The set schedule appears in red, which stands for alarm-triggered
recording. The following shows an example.
Alarm Triggered Snapshot
Alarm triggered snapshot is similar to alarm triggered recording. You need
to enable and configure alarm input first (see steps 1 to 2 in Alarm
Triggered Recording for details) and then proceed with the following steps.
1. Set alarm triggered snapshot: Click under Trigger Actions. In the
window displayed, click the Snapshot tab, select the desired camera,
and then click OK.
2. Set a snapshot schedule under Storage > Snapshot. For the detailed
steps, see Draw or Edit a Schedule. Make sure the schedule type is
Alarm.
Manual Recording and Snapshot
Manual Recording
Right click on the preview window, select Manual in the shortcut menu.
Click the Manual Recording tab, select the desired camera and then click
Start. To stop manual recording, select the camera and then click Stop.