User Manual

62
4. Select a partition.
 Back up to USB storage device
Set the destination in the USB storage device and then click Backup. The
recording(s) will be saved to the specified directory.
NOTE!
 You may want to create a new folder for the recording(s) by clicking
New Folder.
 If the connected storage device has a capacity that is greater than 2T,
clicking Format will format the device to NTFS file system; if the
capacity is 2T or less, the device will be formatted to FAT32 or NTFS.
Only certain devices can format a storage device that has a greater
capacity than 2T.
 A progress bar (e.g., Exporting X/Y) is displayed to indicate the
progress, where X indicates the current number being backed up, and
Y indicates the total number of recordings. To cancel the operation,
click Cancel.
 A backup file is named in this format: camera name-recordi
ng start
time.file extension. For example, Ch9-20150630183546.mp4.
 Back up to a DVD-R disc
Set the destination and then click Backup. The recording(s) will be saved
to the specified directory.
NOTE!
 Before you start burning, check that the video to back up was not
compressed using smart encoding.
 Clicking Cancel before burning is finished will cause the disc
unusable.
 When burning is finished, wait for the drive to eject itself. Do not
eject the drive manually.
 The NVR does not support playback of recordings saved on a disc.
Video Clip Backup
A recording can be clipped and saved to a USB storage device.