User Manual

1
Preface
This manual describes how to use your NVR locally or on the Web
interface.
In this manual, the terms IP camera and IPC refer to the same thing:
network camera, which requires a connection to the network. And the IP
device mentioned in this manual refers to an IP camera (also known as
network camera) or a Digital Video Server (DVS).
Part I Local Operations
An NVR supports two types of operations: local operations and web-
based remote operations. With local operations you connect a monitor
and a mouse to the NVR and use the mouse to operate. If your NVR has
buttons on the front panel or is delivered with a remote control, you may
also control your NVR by pressing the front panel buttons or using the
remote control.
The NVR has an embedded web server and allows web-based operations.
To do this, you need a PC that has a network connection to the NVR and
is installed with a web browser. You just need to navigate to the NVR's IP
address and log in to the Web interface like you log in to the system locally.
This section describes local operations.
1 Before You Begin
Please be aware that the parameters that are grayed out on the system
user interface (UI) cannot be modified. The parameters and values
displayed may vary with device model, and the figures in this manual are
for illustration purpose only.