Manualshelf

User Manual

ManualsBrandsH. VIEW ManualsElectronicsH.VIEW 8 Channels 4K POE NVR Recorder 8MP Onvif Video Recorder, Support 8x8MP/4K IP Security Cameras, Max up to 10TB Hard Drive(Not Included)
81828384858687888990
77
2. Select the camera and then select Enable Shoulder Demarcation.
Draw a virtual line on the screen to set the minimum width of
detection. People narrower than the set width will be ignored.
3. Click the Draw button and then draw rules on the left. Set entrance
direction and sensitivity as needed.
4. By selecting Enable Clear by Schedule, you can have people counting
OSD reset at a specified time every day. You may also click Clear
Counting Result to clear the OSD immediately. Resetting people
counting OSD only changes the OSD. It does not change report
statistics.
5. Click Apply to save the settings.
Defocus Detection
Use defocus detection to check whether the camera focuses properly.
1. Click VCA > VCA Config > Defocus Detection.
2. Select the desired camera and then select Enable to enable defocus
detection.
3. Click right to Trigger Actions and set action(s) to trigger. For
more details, see Alarm-Triggered Actions.
4. (Optional) Click right to Arming Schedule and then set the time
when actions will be triggered.
5. Set detection sensitivity and then click Apply to save the settings.