Manualshelf

User Manual

ManualsBrandsH. VIEW ManualsElectronicsH.VIEW 8 Channels 4K POE NVR Recorder 8MP Onvif Video Recorder, Support 8x8MP/4K IP Security Cameras, Max up to 10TB Hard Drive(Not Included)
81828384858687888990
80
2. Select the camera and select Enable to enable detection of objects
left behind.
3. Click to draw detection areas.
NOTE!
When drawing a detection area, you can use up to 6 points to specify the
area. Up to 4 detection areas area allowed.
4. Set sensitivity and time threshold:
Sensitivity: The higher the sensitivity, the more likely an object left
behind will be detected.
Time Threshold: An alarm will be triggered when the length of time
an object is left behind in a detection area exceeds this value.
5. Click right to Trigger Actions and set action(s) to trigger. For
more details, see Alarm-Triggered Actions.
6. (Optional) Click right to Arming Schedule and then set the time
when actions will be triggered.
7. Click Apply to save the settings.