Operation Manual

ManualsBrandsHaas-Sohn ManualsAir ConditioningBORAS

General instructions for operation,

installation and maintenance

COMBINED FIREPLACE STOVE WITH

WARM WATER EXCHANGER

HAAS + SOHN Rukov s.r.o.

MANUFACTURER:

SNP 474, 408 01 RUMBURK, CZECH REPUBLIC

COMPANY ID: 62740989 TAX ID: CZ62740989

CONTENTS

1. TECHNICAL SPECIFICATIONS ........................................................................5

1. 1. Heating concept ................................................................................................. 5

1. 2. Construction design ........................................................................................... 5

2. BURNING PROCESS........................................................................................ 6

2. 1. Fuel quantity and firing process adjustments ..................................................... 6

2. 2. Fuel.................................................................................................................... 7

3. SAFE OPERATION ........................................................................................... 8

3. 1. General requirements ........................................................................................ 8

3. 2. Safe distance between the fireplace stove and flammable material................... 8

3. 3. Safe distance between the smoke flue and flammable material......................... 8

3. 4. Directions for safe operation .............................................................................. 8

4. INSTALLATION AND CONNECTION TO THE CHIMNEY ................................9

4. 1. Connection to the chimney or chimney insert..................................................... 9

4. 2. Connection to the chimney vent......................................................................... 9

4. 3. Directions for smoke flue installation and safety ................................................ 9

4. 4. Installation of the fireplace stove within the room .............................................10

4. 5. Connection of the fireplace stove with an exchanger to the heating system......10

4. 6. Installation instructions and use of pressure expansion tanks............................11

4. 7. Cleaning the heating device and chimney..........................................................12

4. 8. Chimney fire.......................................................................................................12

4. 9. External combustion air supply system..............................................................

5. OPERATING INSTRUCTIONS..........................................................................12

5. 1. Before first operation..........................................................................................12

5. 2. Setting the fire....................................................................................................13

5. 3. Feeding the fire ..................................................................................................13

5. 4. Glass cleanness.................................................................................................13

5. 5. Operation during temporary period and at worsened weather conditions ..........13

5.6. How to substitute the blind element by the exchanger.......................................14

5. 7. Ash removal .......................................................................................................14

6. CLEANING AND MAINTENANCE ....................................................................14

6. 1. Cleaning.............................................................................................................14

6. 2. Cleaning the ceramics and tiles .........................................................................15

6. 3. Cleaning the warm water exchanger..................................................................15

6. 4. Sealing lines and tapes ......................................................................................15

6. 5. Spare parts.........................................................................................................15

7. WHAT TO DO IF… DO YOU DO IT YOURSELF?............................................15-16

8. FREQUENT PROBLEMS AND QUESTIONS ..................................................17

8. 1. Cracked (released) fireclay (vermiculite) brick in the burning area.....................17

8. 2. Broken glass ......................................................................................................17

8. 3. Partitions to control the chimney effect ..............................................................17

8. 4. Cracked side tile.................................................................................................17

8. 5. Replaceable exchanger (option) ........................................................................18

9. PRODUCT LIABILITY AND SERVICE..............................................................18

9. 1. General ..............................................................................................................18

9. 2. Conditions for guarantee....................................................................................18

9. 3. Guarantee and post-guarantee service..............................................................18

9. 4. Claim rejected ....................................................................................................18

9. 5. How to make a claim..........................................................................................19

9. 6. How to order spare parts....................................................................................19

10. MISCELLANEOUS............................................................................................19

JK 04 164 27 41 14 00 h

Summary of content (13 pages)

PAGE 1
General instructions for operation, installation and maintenance COMBINED FIREPLACE STOVE WITH WARM WATER EXCHANGER HAAS + SOHN Rukov s.r.o. MANUFACTURER: SNP 474, 408 01 RUMBURK, CZECH REPUBLIC COMPANY ID: 62740989 TAX ID: CZ62740989 JK 04 164 27 41 14 00 h CONTENTS 1. 1. 1. 1. 2. 2. 2. 1. 2. 2. 3. 3. 1. 3. 2. 3. 3. 3. 4. 4. 4. 1. 4. 2. 4. 3. 4. 4. 4. 5. 4. 6. 4. 7. 4. 8. 4. 9. 5. 5. 1. 5. 2. 5. 3. 5. 4. 5. 5. 5.6. 5. 7. 6. 6. 1. 6. 2. 6. 3. 6. 4. 6. 5. 7. 8. 8. 1. 8. 2. 8. 3. 8. 4. 8. 5. 9. 9. 1. 9.
PAGE 2
10. 1. 10. 2. 10. 3. 10. 4. 10. 5. 10. 6. 10. 7. 11. Accessories supplied with the fireplace stove ....................................................19 Special accessories (on order)...........................................................................19 Recommended spare parts ................................................................................19 Package and waste disposal..............................................................................
PAGE 3
grate, a barrier is usually provided, to prevent from burning pieces falling out or onto the door (front glass). Under the grate, there is a space designed for ashpan. The remaining space at the bottom part of the fireplace stove may be used for spare fuel. Fireplace stove casing is made of steel panels, ceramic tiles or lined of thick tiles. The fireplace stove steel construction is protected with special refractory paint. A part of the fireplace stove system is a warm water exchanger.
PAGE 4
Flammability class: selected building materials 3. SAFE OPERATION Building materials and products 3.1. General requirements While installing and operating stove, it is obligatory to adhere to the fire prevention regulations (related to this type of devices) in force in the country of installation. The device is designed for standard environment. In case of any temporary change establishing any temporary danger of fire or explosion (for example, while installing linoleum flooring, PVC, painting, etc.
PAGE 5
smoke pipes and the elbow. The hole (entrance point) in the chimney must be provided with a metal stress ring (proper diameter). The smoke flue should ascent towards the smoke uptake at angle approx. 10°. 4.4. Installation of the fireplace stove within the room Before any installation work is started, you need to verify the floor (ceiling) load capacity. The load conditions for the particular type of the device must be met (depending on the particular weight).
PAGE 6
5.2. Setting the fire 4.7. Cleaning the heating device and chimney In the course of the installation of the fireplace stove and connection to the chimney vent, approach in the chimney for occasional cleaning of chimney pipes and the chimney as well is required. By regular cleaning of the smoke pipes and the firing space in the fireplace stove, you may optimise the performance of the heating system. By regular chimney cleaning, you avoid inflammation of fouling solid particles caught on the chimney walling.
PAGE 7
thus the smoke is not led away in full as usual. Therefore, during such period, you should operate the fireplace stove with smallest possible quantity of fuel, to allow improving the firing process and the chimney effect by opening the air inlets in case you need to make adjustments. 5.6. How to substitute the blind element by the exchanger With selected models, the warm water exchanger is screwed in the construction of the heating body.
PAGE 8
Impossible to heat up the fireplace stove within expected time Excessive performance of the fireplace stove Window is getting dirty The fireplace stove produces odour and smoke The exchanger performance is insufficient Heating system is overheated Wrong position of the fuel inside Not Add more logs, see 5.2. Setting the fire enough fuel to set fire 8. FREQUENT PROBLEMS AND QUESTIONS Primary air supply inlet is closed 8.1.
PAGE 9
Caution! If during the operation any part of the lining gets loose by material dilatation, it is recommended to increase the spring force. 8.5. Replaceable exchanger (option) For assembly or disassembly of the exchanger or blind element installation, follow the procedure below: Disassembly Disconnect the exchanger from the heating system, unscrew the nuts (use a wrench), and remove the exchanger. Assembly: For the assembly, follow the same procedure in reverse order.
PAGE 10
3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Stoking door glass Cast grate Sealing tapes Repair spray Sealing tape glue Lining Blind element Decorative and regulating elements (rods, handles, regulators) Steel brush (for the exchanger cleaning) Warm water exchanger (without a cooling loop) MISCELLANEOUS Fireplace tooling and baskets Accessories (smoke flue pipes, elbow pieces, chimney stress rings, etc.) Other special products 10. 7.
PAGE 11
EXAMPLE: PROTECTIVE BARRIER FOR THE HEATING DEVICE AND SMOKE FLUE (dimensions in mm) CLEARANCE BETWEEN THE FIREPLACE STOVE AND THE SURROUNDINGS supplement 1 PASSAGE THROUGH THE SMOKE FLUE WALL OF FLAMMABLE MATERIAL (dimensions in mm) 1 – Protective barrier protecting the rating device and smoke flue against heat 2 – Feeding hole and ashpan hole SMOKE FLUE CONNECTION IN THE CHIMNEY BODY HOLE 1 – Wall 2 – Smoke flue system 3 – Cover (fireproof, non-metal) 4 – rosette 5 – Protective pipe (fireproof, non-
PAGE 12
Warm water reverse piping Warm water inlet piping LEGEND: 1. Fireplace stove and exchanger 2. Circulating pump 3 Expansion vessel 4.Thermoregulation valve , e.g. ESBE TV25 5. Safety valve 6. Closing valve 7. Ball cock 8.Pressure gauge 9 Electric boiler 10. Deaerating valve 11.
PAGE 13
Printed: TISKÁRNA ŘEHÁK Česká Lípa, Czech Republic, Tel.