Assembly Instructions

ManualsBrandsHabitat ManualsBedroom furniture setsHallingford 3 Piece 2 Door Wardrobe Set - White

Assembly Instructions - Please keep for future reference

Issue 5 - 20/05/14

Ruler - Use this ruler to help correctly identify the screws

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

ALR2976

MADE IN

BRITAIN

If you need help or have damaged or missing parts, call the Customer Helpline: 0870 112 1928

or email: Help@ClickSpares.co.uk (quoting your original order number)

Important - Please read these instructions fully before starting assembly

Dimensions

Width - 37.5cm

Depth - 40cm

Height - 58cm

New Hallingford - 3 Drawer Bedside

274/4917

266/4509

258/7693

266/2910

266/7379

Issue 2 - 20/11/13 - Changed to Click helpline number

Issue 3 - 12/03/14 - Knock-in Pegs changed to Grey.

6 Wedgefixes added.

4 Plastinails added.

Drawer depth increased

Issue 4 - 17/04/14 - Add ‘New’ to title.

Issue 5 - 20/05/14 - Drawer Back reduced by 2mm to suit new runners.

Summary of content (12 pages)

PAGE 1
New Hallingford - 3 Drawer Bedside Assembly Instructions - Please keep for future reference 274/4917 266/7379 266/4509 258/7693 266/2910 Dimensions Width - 37.5cm Depth - 40cm Height - 58cm MADE IN BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0870 112 1928 or email: Help@ClickSpares.co.
PAGE 2
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs approximately 14kgs. Please lift with care. • Make sure you have enough space to layout the parts before starting. • Check you have all the components and tools listed on pages 2 and 3. • Do not stand or put weight on the product, this could cause damage. • Remove all fittings from the plastic bags and separate them into their groups.
PAGE 3
Components - Panels If you have damaged or missing components, call the Customer Helpline: 0870 112 1928 or email: Help@ClickSpares.co.
PAGE 4
Components - Fittings If you have damaged or missing components, call the Customer Helpline: 0870 112 1928 or email: Help@ClickSpares.co.uk (quoting your original order number and the reference numbers below) Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
PAGE 5
Assembly Instructions If you have damaged or missing components, call the Customer Helpline: 0870 112 1928 or email: Help@ClickSpares.co.uk (quoting your original order number and the reference numbers below) Step 1 Prepare the 3 drawer fronts B B Screw 2 metal dowels into the holes shown on the back of each drawer front 5 . B B 5 x3 Note: Tighten metal dowels up fully against the panels.
PAGE 6
Assembly Instructions Step 4 Fit the drawer base 9 Slide the drawer base 9 down the grooves in the drawer sides 6 and 7 and down into the groove in the drawer front 5 . 7 x3 6 5 Step 5 E Fit the drawer back E Fit the drawer back 8 between the drawer sides 6 and 7 . Make sure that the drawer base 9 fits into the groove in the drawer back 8 . 8 E 7 E 9 6 x3 Hold the drawer back 8 in position and tap the knock-in pegs E through the holes in the drawer sides 6 and 7 .
PAGE 7
Assembly Instructions Step 8 Fit runners to the drawers Runners must be pushed up against the drawer front I Turn the 3 drawer assemblies over. I 5 I 7 R 6 x3 L L R Fit runner K d , marked with ‘R’, to the bottom edge of the right drawer side 7 , as shown, making sure that it is pushed up against the back of the drawer front .5 . Use a bradawl to mark the fixing positions, then secure with 2 screws I .
PAGE 8
Assembly Instructions Prepare the left side a: Fit 3 runners K a to the left side 1 . The 1st screw H uses the 2nd hole in from the front of the runner. The 2nd and 3rd screws .H use the holes that line up with the other panel holes. Finished front edge Step 10 1st H screw 2nd H 3rd H screw screw K a H Finished front edge a: H H H H H Screw 2 metal dowels B into the left side 1 . Insert a large locking nut D into the left side . .1 . Tap a wooden dowel A into the left side 1 .
PAGE 9
Assembly Instructions Step 11 Prepare the right side a: Fit 3 runners K b to the right side 2 . H H H a: H H H H H K b H K b 2 The 1st screw H uses the 2nd hole in from the front of the runner. K b Finished front edge 3rd H 2nd screw screw H 1st screw K b Finished front edge H The 2nd and 3rd screws .H use the holes that line up with the other panel holes. b: Fit a screw I into the 2nd hole in at the top of the runner K b . Insert a large locking nut D into the right side .2 .
PAGE 10
Assembly Instructions Step 13 Fit the left side Push the left side 1 onto the 2 rails 4 . Use a screwdriver to tighten the 2 large locking nuts D fitted to the rails 4 . Step 14 4 1 4 Plain chipboard surface B Prepare the top B Screw 2 metal dowels B into the top 3 . 3 Shaped front edge Step 15 Fit the top Push the top 3 onto the 2 sides 1 and 2 . Use a screwdriver to tighten the 2 large locking nuts D fitted to the sides 1 and 2 .
PAGE 11
Assembly Instructions Step 16 a: Fit the back The measurement from top corner X to bottom corner X must be equal to the measurement from top corner Y to bottom corner Y a: Square up the unit by making sure that measurement x to x equals y to y. b: Place the back b: x F 10 onto the unit. Nail F around the outside edges of the back 10 . y y 10 Note: Nails should be spaced about 150mm apart. x Stand the unit up for the next step. Warning: The unit is heavy. Lift with care.
PAGE 12
Assembly Instructions Step 18 Fit the drawers Slide the wheels of the runners fitted to the drawers, over the wheels of the runners fitted to the side panels and push the drawers into position. Assembly is complete Side panel Drawer If you need help or have damaged or missing parts, call the Customer Helpline: 0870 112 1928 or email: Help@ClickSpares.co.