Spare Parts List
Table Of Contents
- ZJEN2DT GG WG 01
- ZJEN2DT GG WG 02
- ZJEN2DT GG WG 03
- ZJEN2DT GG WG 04
- ZJEN2DT GG WG 05
- ZJEN2DT GG WG 06
- ZJEN2DT GG WG 07
- ZJEN2DT GG WG 08
- ZJEN2DT GG WG 09
- ZJEN2DT GG WG 10
- ZJEN2DT GG WG 11
- ZJEN2DT GG WG 12
- ZJEN2DT GG WG 13
- ZJEN2DT GG WG 14
- ZJEN2DT GG WG 15
- ZJEN2DT GG WG 16
- ZJEN2DT GG WG 17
- ZJEN2DT GG WG 18
- ZJEN2DT GG WG 19
- ZJEN2DT GG WG 20
- ZJEN2DT GG WG 21
- ZJEN2DT GG WG 22
- ZJEN2DT GG WG 23
- ZJEN2DT GG WG 24
Important note:
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
If plastic wall plugs
are supplied with your
product:
- these are only suitable for
use in masonry walls.
If you are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
Failure of the product due to
using incorrect fixings is the
responsibility of the installer.
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a qualified
tradesperson if you are unsure.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of
the ceramic tiles to avoid the tiles splitting or cracking.
5: Ensure wall plugs are well fitted and are a tight fit in the
drilled hole.
Types of walls
You can use one of the following types of wall plug if your
walls are made of brick, breeze block, concrete, stone or wood.
Generally aerated blocks should not
be used to support heavy loads, use
a specialist fitting in this case. For light
loads, general purpose wall plugs can
be used.
For use with plasterboard partitions or
hollow wooden doors.
For use with walls stuck with
plasterboard. The hammer fixing allows
it to be fixed to the wall rather than the
plasterboard. Always check the fixing
is secure to the retaining wall.
For use when attaching light loads on
to plasterboard partitions.
For use when fitting or supporting
heavy loads such as shelving, wall
cabinets and coat racks.
For use with heavier loads such as TV
& HiFi speakers and satelite dishes etc.
No.1 “General Purpose” wall plug No.3 “Cavity Fixing” wall plug No.5 “Hammer Fixing” wall plug
No.2 “Plasterboard” wall plug
No.4 “Cavity Fixing-Heavy Duty”
wall plug
No.6 “Shield Anchor” wall plug
Heavy loads
A Guide to Wall Mounting & Fixings
Care &
Maintenance
Safety: Always check the fitting
and location to ensure your safety
in and around the home.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.