Assembly Instructions

No.2 "General Purpose" Wall Plug
Aerated / Breeze Block
Generally aerated blocks should not be
used to support heavy loads, use a
specialist fitting in this case.
For light loads, a General Purpose Plug
can be used.
A Guide to
A Guide to
Wall Mounting & FixingsWall Mounting & Fixings
No.5 "Cavity Fixing - Heavy Duty"
Wall Plug
For use when fitting or supporting heavy
loads such as shelving, wall cabinets,
coat racks.
No.6 "Hammer Fixing" Wall Plug
For use with walls stuck with plaster board.
The hammer fixing allows it to be fixed to
the wall rather than the plaster board.
Always check the fixing is secure to the
retaining wall.
HINTS:
1) General Rule Always use a larger screw and wall plug if you are not sure.
2) Ensure you use the recommended drill bit to match the wall plug and hole size.
3) Ensure you drill the hole horizontally, do not force the drill or enlarge the hole.
4) Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure the
plug is fitting below the ceramic tile to avoid splitting or cracking.
5) Ensure wall plugs are well fitted and are a tight fit in the drilled hole.
IMPORTANT:
When drilling into walls always check
that there are no hidden wires or pipes
etc. Make sure that the screws and wall
plugs being used are suitable for
supporting your unit. Consult a qualified
tradesperson if you are unsure.
No.3 "Shield Anchor" Wall Plug
Heavy Loads
For use with heavier loads such as TV
& HiFi Speakers and Satellite Dishes etc.
No.4 "Cavity Fixing" Wall Plug
For use with plaster board partitions or
hollow wooden doors.
Types Of Walls
You can use one of the following types
of wall plug if your walls are made of brick,
breeze block, concrete, stone, wood or
plaster board.
No.1 "Standard" Wall Plug
General Wall Materials
These come in various sizes and are
made from plastic or sometimes wood
fiber.
CARE & MAINTENANCE
SAFETY
Always check the fitting and location to ensure your safety in and around the home.
FITTING
From time to time check the fitting to ensure the wall plugs or screws do not become
loose.