Yani 3' Bed to Go Assembly Instructions – Please keep for future reference 621/ 6867 612/ 9033 Dimensions Length - 201cm Width - 99cm Height - 105cm Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800 Issue 1 - 27/09/16
Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the components and tools listed on pages 2 and 3. • Remove all fittings from the plastic bags and separate them into their groups. • Keep children and animals away from the work area, small parts could choke if swallowed. • Parts of the assembly will be easier with 2 people. • Make sure you have enough space to layout the parts before starting.
Components - Parts Please check you have all the parts listed below 1 Headboard panel (98 x 64cm) 2 Headboard post x 2 (45.5 x Ø3.2cm) 3 Side rail x 2 (98.4 x 10cm) 4 Side rail x 2 (98.4 x 10cm) 5 Slat (Thread each end) x 4 (97.1 x Ø1.9cm) 6 Slat x 8 (97.1 x Ø1.9cm) 7 Support leg x 2 8 Footboard (98 x 68.5cm) 9 Finial x 4 (Ø5.2cm) (29.
Components - Fittings If you have damaged or missing components, call the Customer Helpline: 0345 6400 800 Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Assembly Instructions Step 1 1 Assembling posts Place headboard panel 1 face down onto a clean flat surface. A Back B 2 Note: Fixing holes for posts should be facing up. A 1 B Secure headboard posts 2 to headboard panel 1 using fixings A and B . Front 2 Step 2 Assembling side rails 3 Assemble side rails 3 and 4 together using screws A . Repeat for the other side rail. A 4 3 A 4 Step 3 Assembling slats Assemble slats 5 to one side rail only, using screws C .
Assembly Instructions Step 4 Assembling slats Locate slats 6 into the remaining holes in the side rail. Note: Slats 6 have no threads in the end and do not require fixing. 6 6 3 6 6 6 6 4 6 6 Step 5 Assembling slats With help, locate the remaining side rail onto the ends of the slats. Secure using screws C as shown.
Assembly Instructions Step 6 Assembling side rails a: With help, assemble side rails to the headboard using fixings B , D , E and F . b: Assemble footboard 8 to the side rails using fixings B C and E . d: 9 a: B c: Assemble support leg 7 to the underside of the side rail using screws A. F D 4 E 2 Repeat on both sides. a: d: Screw finials 9 into the headboard and footboard corner posts. 4 2 E F c: B A 7 D 3 b: C B E 8 A 7 c: b: E 3 8 C B Assembly is complete.