HM White Console 2 Drawer Shelf 760/9253 80cm 34cm 75cm 3 Issue 1 - 09/28/17
Components - Panels If you have damaged or missing components, call the Customer Helpline:03456 400800 Please check you have all the panels listed below 1 Top panel 2 4 5 Back panel Shelf x 2 Left side panel 2 6 Front rail 8 Clapboard panel 10 Right drawer front 9 Left drawer front 11 Drawer left side x 2 13 Drawer back x 2 14 Drawer bottom x 2 7 Bottom rail 12 Drawer right side x 2 3 Right side panel
Components - Fittings Please check you have all the fittings listed below Note:The quantities below are the correct amount to complete the assembly .In some cases more A B C Wooden dowel x 8 Locking Nut x 24 Locking Pin x 24 D E F Nut x 8 50mm Bolt x 8 Runner x 4 I H G Knob x 2 15mm Bolt x 2 10mm Bolt x 4 K L 35mm Screw x 8 Wall plug(for solid walls only) x 1 M N O Wall strap x 1 35mm Screw x 1 Flat washer x 2 P Q R J 10.
Assembly Instructions Step 1 a: Assembling runner Fix part J F NOTE: It would be useful to ask someone to help you at this stage. a: use 6 x screw J to fix 2 x runner F on clapboard panel 8 . Screw Front Slide part F C C C Front Front F 8 8 8 F Insert 2 x wooden dowel C into clapboard panel . J J Screw Fix part J F Slide part Front F b: Screw Fix part J F Front Slide part F b: Screw 6 x locking pin A into lelf side panel 2 and right side panel 3 .
Assembly Instructions Step 2 Assembling back panel a: A NOTE: It would be useful to ask someone to help you at this stage. 5 a: Screw 2 x locking pin A into back panel 5 and bottom rail 7 . C A Insert 2 x wooden dowel C into bottom rail as shown . 7 C b: Attach back panel 5 and bottom rail 7 onto the clapboard panel as shown. Insert 2 x locking nut B into clapboard panel and tighten the locking nut to secure the unit.
Assembly Instructions Step 3 Assembling side panel NOTE: It would be useful to ask someone to help you at this stage. 7 B B B Attach left side panel 2 and right side panel 3 onto the unit as shown. B 5 3 Insert 6 x locking nut B into bottom rail ,back panel and tighten the locking nut to secure the unit. 2 B Step 4 Assembling shelf NOTE: It would be useful to ask someone to help you at this stage.
Assembly Instructions Step 5 a: Assembling top panel R A A NOTE: It would be useful to ask someone to help you at this stage. A A A A R A 1 A a: Screw 8 x locking pin A into top panel 1 . Use 2 x screw R to fix front rail 6 to top panel. 6 b: 1 8 5 B b: Carefully attach top panel 1 to the unit. B B 3 2 Insert 8 x locking nuts B to back panel 5 ,side panel 2 3 , clapboard 8 as shown and lock the nuts by a screwdriver.
Assembly Instructions Step 7 K Assembling drawer a: 12 3 13 3 a: Use 4 x screw K to fix drawer side panel 11 12 onto drawer back panel 13 . 11 3 K b: B b: Carefully slide bottom panel 14 into grooves. 14 3 Screw 4 x locking pin A into left drawer front 9 ,insert 4 x locking nut B into drawer side panels, tighten it closkwise to secure. B H A 9 3 A G Fix knob G to the drawer front panle 93 with bolt H . c: Repeat above steps to assemble the other drawer 10 . 10.5mm 1.5mm 9 3 8 1.5mm 10.
Assembly Instructions Step 8 Assembling drawer I NOTE: It would be useful to ask someone to help you at this stage. F I Input drawer to the unit as shown. Screw 4 x bolt I into holes as shown,try if drawer stopper function well. 9 3 Use 8 x plastic cap S to cover the bolt D as shown. 10 3 S S S S S D After above assembly, please double check and make sure all screws are firmly fixed before use.
A Guide to - Wall Mounting & Fixings Important: When drilling into walls always check that there are no hidden wires or pipes etc. Important note: If plastic wall plugs are supplied with your product: Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualified tradesperson if you are unsure. Hints: - these are only suitable for use in masonry walls. If you are in any doubt about the correct wall plugs for your wall, seek professional advice.
