Highsleeper - Brooklyn Assembly Instructions - Please keep for future reference 8545639 Dimensions Length - 200,4cm Depth - 106cm Height - 184,7cm Weight - 47kg Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055 or e-mail: order@flexa.
Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the components and tools listed on pages 2 and 3. • Do not stand or put weight on the product, this could cause damage. • Remove all fittings from the plastic bags and separate them into their groups. • Assemble the item as close to its final position (in the same room) as possible. • Keep children and animals away from the work area, small parts could choke if swallowed.
Components - Parts If you have damaged or missing components, call the Customer Helpline: 0045 7668 8055 Please check you have all the parts listed below 1 Tread x4 (31,8x6,5x2,6cm) 2 Endrail x2 (86,5x8,9x2,0cm) No. 12-02603182-65 4 Filling x2 (86,5x29,8x0,8cm) No. 4301-0808653-65 7 Endrail x2 (86,5x5,5x5,5cm) No. 12-05508651-65 3 No. 12-02008653-65 5 Slat x18 (89,7x5,5x1,1cm) No. 12-01108971 6 Short post x1 (35,3x4,3x4,3cm) No. 12-04303531-65 Top rail x2 (100,2x8,2x2,4cm) No.
Components - Parts If you have damaged or missing components, call the Customer Helpline: 0045 7668 8055 Please check you have all the parts listed below 10 Bedside x2 (186.7x8.9x2.0cm) No. 1305-186710-65 13 Leg x2 (182,3x5,5x5,5cm) No. 12-05518231-65 3 11 Safety rail x3 12 Safety rail x2 (186.7x8.9x2.0cm) No. 12-02018672-65 (146,6x8.9x2.0cm) No. 12-02014661-65 14 Leg x2 (182,3x5,5x5,5cm) No.
Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. No. 3913-06100 A No. 3922-06014 C B M6x100mm Connecting bolt x12 M6 ø10x14mm Barrel nut x12 No. 3930-10050 10x50mm Dowel x36 Ø8mm Cover cap x16 No. 3909-631051 6,3x105mm Assembly screw x16 No.
Assembly Instructions Step 1 D D Insert the dowels into the holes in bedsides 10 , safety rails 11 and 12 and endrails 8 and 7 . Insert Ø8 dowels E into the holes in endrail 7 . D Ø10 E Ø8 D 10 It may be necessary to tap the dowels in very gently with a small hammer. D 11 D 12 E D D D 7 D D 8 E Step 2 Attach endrails 7 to top rails 6 using screws G . G D G Don’t overtighten. G G G 7 6 Step 3 Attach leg 13 to endrail 7 using the inserted dowel only.
Assembly Instructions Step 4 H 14 Attach leg to endrails 7 and 8 . At the same time attach endrail 2 between the legs 13 and H H 14 Insert assembly screws H and fasten with the allen key. Don’t overtighten. 7 4 H 8 13 H 2 14 H H 15 Holes up! Step 5 Attach bedside 10 and safety rails 11 to the bed by placing the dowels into the holes in legs 13 and 14 .
Assembly Instructions Step 6 Attach the second bedside 10 to the bed by placing the dowels into the holes in legs 13 and 14 as in the previous step. A B Push 2 barrel nuts B into the small holes in bedside 10 . Push 1 connecting bolt A through legs 13 and 14 to meet the barrel nuts B and fasten with the allen key. 10 B 13 A 14 A B Step 7 Attach safety rails 12 to the bed by placing the dowels into the holes in leg 14 . N Push 2 barrel nuts B into the small holes in safety rails 12 .
Assembly Instructions Step 8 L Attach the treads 1 to the ladder sides 9 using the screws M . Attach brackets Q to the ladder sides 9 using the screws J . Attach angles R to the ladder sides 9 using the screws L . L R Q R J Q M 9 J M J Q 9 1 M R R L 1 M M 1 M M 1 L Step 9 Place the assembled ladder into the bed. Fasten brackets Q to the bedside 10 using the screws I . Attach the ladder to the leg and short post using screws K through the angles R .
Assembly Instructions Step 10 Place two slats 5 in the ends of the bed, against the legs. Fasten with four chipboard screws C . 10 Place one slat 5 in the bed. Follow the measurements. 798 mm Push the bedsides 10 together whilst attaching middle slat 5 to the bed with two chipboard screws C . 904 mm 5 C C C 10 C Step 11 Position the remaining fifteen slats 5 in the bed with an approximate distance of 52 mm between each.
Assembly Instructions Step 12 Attach wall mount brackets P to legs 13 and 14 with chipboard screws J . Assembly is complete. 13 P J 14 J P If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055 E-mail: order@flexa.dk Ref.no.