Highsleeper - Brooklyn Assembly Instructions - Please keep for future reference 8545639 Dimensions Length - 200,4cm Depth - 106cm Height - 184,7cm Weight - 47kg Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055 or e-mail: order@flexa.
Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the components and tools listed on pages 2 and 3. • Do not stand or put weight on the product, this could cause damage. • Remove all fittings from the plastic bags and separate them into their groups. • Assemble the item as close to its final position (in the same room) as possible. • Keep children and animals away from the work area, small parts could choke if swallowed.
Components - Parts If you have damaged or missing components, call the Customer Helpline: 0045 7668 8055 Please check you have all the parts listed below 1 Tread x4 (31,8x6,5x2,6cm) No. 12-02603182-65 4 Filling x2 (86,5x29,8x0,8cm) No. 4301-0808653-65 7 Endrail x2 (86,5x5,5x5,5cm) No. 12-05508651-65 2 Endrail x2 (86,5x8,9x2,0cm) 3 No. 12-02008653-65 15 Slat x15 (89,7x6,5x1,47cm) No. 12-01508971 6 Short post x1 (35,3x4,3x4,3cm) No. 12-04303531-65 Top rail x2 (100,2x8,2x2,4cm) No.
Components - Parts If you have damaged or missing components, call the Customer Helpline: 0045 7668 8055 Please check you have all the parts listed below 10 Bedside x2 (186.7x8.9x2.0cm) No. 1305-186710-65 13 Leg x2 (182,3x5,5x5,5cm) No. 12-05518231-65 3 11 Safety rail x3 12 Safety rail x2 (186.7x8.9x2.0cm) No. 12-02018672-65 (146,6x8.9x2.0cm) No. 12-02014661-65 14 Leg x2 (182,3x5,5x5,5cm) No.
Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. No. 3913-06100 A No. 3922-06014 B M6x100mm Connecting bolt x12 M6 ø10x14mm Barrel nut x12 No. 3930-10050 10x50mm Dowel x36 F Ø8mm Cover cap x16 8x50mm Dowel x4 No. 3909-631051 No. 3901-40070 4,0x70mm Chipboard screw x8 6,3x105mm Assembly screw x16 No.
Assembly Instructions Step 1 D D Insert the dowels into the holes in bedsides 10 , safety rails 11 and 12 and endrails 8 and 7 . Insert Ø8 dowels E into the holes in endrail 7 . D Ø10 E Ø8 D 10 It may be necessary to tap the dowels in very gently with a small hammer. D 11 D 12 E D D D 7 D D 8 E Step 2 Attach endrails 7 to top rails 6 using screws G . G D G Don’t overtighten. G G G 7 6 Step 3 Attach leg 13 to endrail 7 using the inserted dowel only.
Assembly Instructions Step 4 H 14 Attach leg to endrails 7 and 8 . At the same time attach endrail 2 between the legs 13 and H H 14 Insert assembly screws H and fasten with the allen key. Don’t overtighten. 7 4 H 8 13 H 2 14 H H 15 Holes up! Step 5 Attach bedside 10 and safety rails 11 to the bed by placing the dowels into the holes in legs 13 and 14 .
Assembly Instructions Step 6 Attach the second bedside 10 to the bed by placing the dowels into the holes in legs 13 and 14 as in the previous step. A B Push 2 barrel nuts B into the small holes in bedside 10 . Push 1 connecting bolt A through legs 13 and 14 to meet the barrel nuts B and fasten with the allen key. 10 B 13 A 14 A B Step 7 Attach safety rails 12 to the bed by placing the dowels into the holes in leg 14 . N Push 2 barrel nuts B into the small holes in safety rails 12 .
Assembly Instructions Step 8 L Attach the treads 1 to the ladder sides 9 using the screws M . Attach brackets Q to the ladder sides 9 using the screws J . Attach angles R to the ladder sides 9 using the screws L . L R Q R J Q 9 J M M J Q 9 1 M R R L M 1 M M 1 M M 1 L Step 9 Place the assembled ladder into the bed. Fasten brackets Q to the bedside 10 using the screws I . Attach the ladder to the leg and short post using screws K through the angles R .
Assembly Instructions Step 10 Place two slats 15 in the ends of the bed, against the legs. Fasten with four chipboard screws J . J J J J Place one slat 15 in the middle of the bed. Follow the measurements. 10 Push the bedsides 10 together whilst attaching middle slat 15 to the bed with two chipboard screws J . 836 mm 836 mm 15 15 15 10 J J J Step 11 Position the remaining twelve slats 15 in the bed with an approximate distance of 63-64 mm between each.
Assembly Instructions Step 12 Attach wall mount brackets P to legs 13 and 14 with chipboard screws J . Assembly is complete. 13 P J 14 J P If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055 E-mail: order@flexa.dk Ref.no.