Radius Extending Dining Table Assembly Instructions - Please keep for future reference RADI-ED-AW18-B Dimensions Width - 160 / 260cm Depth - 90cm Height - 74cm 1 Important – Please read these instructions before assembly If you need help or have damaged or missing parts, email: customerservices@habitat.co.
Safety and Care Advice Important – Please read these instructions fully before starting assembly Check you have all the components and tools listed on the front cover and pages 3 - 4. Remove all fittings from the plastic bags and separate them into their groups. Keep children and animals away from the work area, small parts could choke if swallowed. Do not stand or put weight on the product, this could cause damage. Assemble the item as close to its final position (in the same room) as possible.
Components - Panels If you need help or have damaged or missing parts, email: customerservic es@habitat.c o.uk or call: 0344 499 4686 Please check you have all the panels listed below BC Note: There are ‘Batch Code’ lables where shown on the indicated items, these should be retained.
If you need help or have damaged or missing parts, email: customerservic es@habitat.c o.uk or call: 0344 499 4686 Components - Fittings Please check you have all the fi xings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Assembly Instructions Step 1 1 3 Ax6 Dx4 4 Step 2 1 1 Ex8 1 2 5
Assembly Instructions Step 3 1 2 1 1 2 STEP 2 STEP 1 ROTATE RELEASE PLEASE NOTE! Caution when taking out extension to avoid damaging runner catches.
Assembly Instructions Step 5 1 2 1 Bx6 Cx6 Fx1 4 1 3 7
Assembly Instructions Step 6 1 2 1 1 4 3 TAKE CARE! NEVER DRAG THE LEGS OF THIS TABLE ON THE FLOOR! PLEASE NOTE! Before you can slide the extending table top open or closed you will need to ensure that the locking mechanism is in the open position. Always extend this table with the help of 2 people - one at each end.
Assembly Instructions Step 8 LOCK PLEASE NOTE! Don't forget to lock the sliding mechanism after the extension leaf has been fitted.
Assembly Instructions Step 10 2 2 1 2 LOCK 10
Assembly Instructions Step 11 1 2 STEP 2 STEP 1 ROTATE 2 11 RELEASE 2
Assembly Instructions Step 12 STEP 2 ROTATE 2 STEP 1 STEP 3 ROTATE LOCK 2 12 2
Assembly Instructions Step 13 13
