MAX Narrow Bookcase Assembly Instructions - Please keep for future reference MAX-NB-SS18-A Dimensions Width - 50cm Depth - 35cm Height - 180cm Tools required 1 Important – Please read these instructions before assembly If you need help or have damaged or missing parts, email: customerservices@habitat.co.
Check you have all the components and tools listed on the front cover and page 3-4. Assemble the item as close to its final position (in the same room) as possible. Remove all fittings from the plastic bags and separate them into their groups. 1 2 1 Assembly requires at least 2 people Please see recommended maximum loading guidance near end of this document. Always lift and move. From time to time check that there are no loose fittings. Tighten as necessary. Dust regularly with a clean dry cloth.
Components If you need help or have damaged or missing parts, email: customerservices@habitat.co.uk or call: 0344 499 4686 Please check you have all the panels listed below 1 4 8 BC V 5 3 4 2 6 7 12 11 10 13 9 BC Retain batch code label.
Components and Fittings If you need help or have damaged or missing parts, email: customerservices@habitat.co.
Assembly Instructions Assembly Instructions Please keep safe for future reference Before assembling the furniture please identify all component parts. It would be sensible to assemble the furniture as close to its final position as possible. Do not place furniture directly in front of radiators, fires or any source of heat. Ensure the surface on which you are assembling the furniture is flat and clear of anything that might scratch it.
Assembly Instructions Step2: F X4 G X1 6 Step3: 6 H X1 Step4: 1 2 1 3 5 6 A X4 6 6
Assembly Instructions Step5: 1 2 1 2 5 3 6 A X4 Step6: 3 2 C X8 7
Assembly Instructions Step7: 3 2 7 I X4 Q X1 Step8: 8 3 2 8 3 2 8
Assembly Instructions Step9: 1 2 1 Take care when standing product upright Step10: 1 2 1 1 3 2 I X4 Q X1 9
Assembly Instructions Step12: Step11: 4 3 2 4 N X8 8 P X4 10
Assembly Instructions Step14: Step13: Metal strike plate for magnetic drawer fitting.
Assembly Instructions Step17: J X1 13 10 E X6 K X1 9 Step18: Please Note! Adjusting Push-To-Open Door Mechanism If drawer does not open when pushed in it could be because the push-to-open mechanism needs adjustment. Simply turn the magnetic end of the mechanism to screw it out further so that it makes . better contact with the metal strike plate.
Assembly Instructions Step19: 40cm 181.5cm 181.5cm WARNING! In order to prevent overturning this product must be used with the wall attachment device provided. Serious or fatal crushing injuries can occur from furniture tipping over. To help prevent topple over :- Use the wall attachment devices provided - Never allow children to climb or hang on drawers -Do not overload the drawers beyond maximum recommended loading. - Place heaviest items in the lower drawers or shelves.
Assembly Instructions Step20: Step21: R O R O O X2 R X2 Due to the variety of different wall types, Habitat cannot provide you with the exact fittings you will need to fix this product to the wall. You must first identify the type of wall you intend to fix the product onto and then contact your local hardware store to get the appropriate fittings. Please refer to the Wall Mountings & Fixings Guide at the end of this assembly/care instruction.
Recommended Maximum Loading MAX 15Kg MAX 15Kg MAX 15Kg MAX 15Kg MAX 5Kg 15
A Guide to - Wall Mounting & Fixings Important: When drilling into walls always Important note: Wall Fixings: check that there are no hidden wires or pipes etc. Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualified tradesperson if you are unsure. Hints: - because of the variety of different wall types, Habitat cannot provide you with the exact fixings you will need to fix this product to the wall.