Aspley - 4FT Bed Assembly Instructions - Please keep for future reference 481/9651 483/1938 553/3077 937/3233 Dimensions Width - 132cm Depth - 202.
Safety and Care Advice Important –Please read these instructions fully before starting assembly Check you have all the components and tools listed on pages 2 and 3. Remove all fittings from the plastic bags and separate them into their groups. Keep children and animals away from the work area, small parts could choke if swallowed. Make sure you have enough space to layout the parts before starting. Do not stand or put weight on the product, this could cause damage.
Components - Panels Please check you have all the panels listed below 1 Headboard (100.0 x 129.9cm) 2 Footboard (34.0 x 129.9cm) 3 Side rail x 2 (190.0 x 11.0cm) 4 Central rail (193.2 x 6.5cm) 5 Slats x 24 (61.0 x 7.0cm) 6 Middle support x 02 (22.5 x 7.0cm) 7 Headboard top rail 8 Footboard top rail (132.0 x 6.8cm) (132.0 x 6.
Components - Fittings If you have damaged or missing components, call theCustomer CustomerHelpline: Helpline:03456 03456400 400800 800 Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. A B Wooden dowel x 10 3.5 x 16mm Screw x 8 10005 10 x 50mm C D 9002 E 4 x 35mm Screw x 48 G 1/4 x 110mm Bolt x 4 9301 Cab.
Assembly Instructions Step1 Insert dowels A into the side rails 3 . A 2x 3 A Step2 Insert wooden dowels A into headboard 1 and footboard 2 as shown.
Assembly Instructions Step3 Fixing top rail Caution: Carefully lay the headboard top rail on a soft and clean surface to avoid damaging the product. M 1 Fix headboard top rail 7 to the headboard 1 using bolts O O and allen key M . M M M M O O O O 7 7 P Step4 P Fixing top rails Caution: Carefully lay the footboard top rail on a soft and clean surface to avoid damaging the product. P P A A A Screw metal dowels P into footboard top rail 8 . Do not over tighten.
Assembly Instructions Step5 Fit footboard top rail footboard 2 . 8 to the Insert locking nuts Q where shown. Use a screwdriver to turn locking nuts Q clockwise to lock. 2 Q Q Q Q 8 Step6 Screw headless bolts E into footboard 2 .
Assembly Instructions Step7 Fixing metal brackets. Fix metal brackets J into the pre drilled holes in the headboard 1 and footboard 2 using screws B . 1 J B J B 2 J B C Step8 Assembling central rail and inserting dowels. C 4 Attach central rail 4 into the pre drilled holes in the middle supports 6 using screw C .
Assembly Instructions Step9 Assembling side rails. M Important: Two people are required for an easier assembly. G F 1 3 With help, fit one side 3 to the headboard 1 . Insert half moon nuts G as shown, then fix parts using bolts F and allen key M. 3 3 Repeat step 9 for the other side rail. Step10 a a: Insert washer K into the side rails. Fit the headless bolts in the footboard thought the washers. K b: Fix headless bolts E using nuts H and spanner L .
Assembly Instructions Step11 Attach central rail 4 to the metal brackets in the headboard and footboard using screws B .
Assembly Instructions Step12 Assembling slats Please fix the first slats 5 at the end of the rail and work towards the middle of the bed using the spacer N and R as shown to ensure correct spacing. Note that for first slats, spacer R should be used in the middle and spacer N at the sides as shown in the drawing. Fix slats in one side first, then fix them in the central rail by pushing the rail against the slats if necessary. Repeat in the other side rail.
11
