User Manual

ManualsBrandsHach-Lange ManualsEquipmentNH4D sc Chain Mount Kit

DOC273.52.00147

Chain Mount Kit LZX914.99.12400

Instruction Sheet

Summary of content (12 pages)

PAGE 1
DOC273.52.00147 Chain Mount Kit LZX914.99.
PAGE 3
DOC273.52.00147 Instruction Sheet Chain Mount Kit LZX914.99.12400 Introduction This instruction sheet describes the installation of the chain mount kit for 1½-inch NPT thread 45° (Cat. No. LZX914.99.12400). Items supplied are shown in Figure 1 on page 3. Not all items in the hardware set are required. Only the parts used in these instructions are listed. Installation dimensions are shown in Figure 2 on page 4. Figure 1 Items supplied with the chain mount kit (LZX914.99.
PAGE 4
Chain Mount Kit LZX914.99.12400 Figure 2 Installation dimensions Selecting the installation location Important note: Refer to the sensor user manual when installing the mounting hardware. Note all safety instructions and hazards. Note: When selecting the installation location, always ensure there is safe access to all parts of the system and that the sensor can never hit the tank wall.
PAGE 5
Chain Mount Kit LZX914.99.12400 Installing the chain bracket on the ground 1. Find a suitable installation location and install the quick-fit anchors. 2. Drill the mounting holes (Figure 3 on page 6). 3. Fit the quick-fit anchors in the ground. 4. Hit the head of the quick-fit anchor with a hammer to spread the quick-fit anchor in the hole. 5. Install the mounting plate on the quick-fit anchors. 6.
PAGE 6
Chain Mount Kit LZX914.99.12400 16. When installing a cleaning unit, connect the air tubing to the compressed air supply.
PAGE 7
Chain Mount Kit LZX914.99.
PAGE 8
Chain Mount Kit LZX914.99.
PAGE 9
Chain Mount Kit LZX914.99.12400 Installing the chain bracket on a railing 1. Find a suitable installation location and install the mounting plate on the railings using the U-bolts. 2. Proceed as described in Installing the chain bracket on the ground on page 5, step 4. Refer to Figure 7, Figure 8 on page 10, and Figure 9 on page 11 for rail mounting details.
PAGE 10
Chain Mount Kit LZX914.99.
PAGE 11
Chain Mount Kit LZX914.99.
PAGE 12
Contact HACH LANGE GMBH Willstätterstraße 11 D-40549 Düsseldorf Tel. +49 (0)2 11 52 88-0 Fax +49 (0)2 11 52 88-143 info@hach-lange.de www.hach-lange.com HACH LANGE LTD Pacific Way Salford GB-Manchester, M50 1DL Tel. +44 (0)161 872 14 87 Fax +44 (0)161 848 73 24 info@hach-lange.co.uk www.hach-lange.co.uk HACH LANGE LTD Unit 1, Chestnut Road Western Industrial Estate IRL-Dublin 12 Tel. +353(0)1 46 02 5 22 Fax +353(0)1 4 50 93 37 info@hach-lange.ie www.hach-lange.ie DR. BRUNO LANGE GES.