Manual

10
Figure 8 Circuit diagram (see inside of the lid)
Clean the power connection socket
Wipe the outside of the housing with a damp cloth. Make sure that the connector is well
sealed with the sealing cap. Use a mild cleaning agent if required. Solvents must not be
used.
Replace the fuse
1. Make sure that the power connection box is disconnected from the power supply.
1 Phase, line (live) 7 Black for left power socket
2 Connection to terminal 1 via bridge 8 Black for right power socket
3 Connection to terminal 4 via bridge 9 White for left power socket
4 Neutral conductor 10 White for right power socket
5 Protective ground (two terminals) 11 Fuse, T 5 A H, 250 V (4x)
6 Protective ground for left and right power socket 12 Lid protective ground
DANGER
Risk of electric shock.
Disconnect the power connection socket from the power supply before it is cleaned in order to
avoid electric shocks.
DANGER
Risk of electric shock.
The procedures described in this section of the instruction sheet may only be performed by
qualified personnel.
DANGER
Risk of electric shock.
An incorrect fuse can lead to injuries and damage. The fuse must always be replaced with a fuse
of the same type and with the same nominal values.