Sigma 900 MAX Refrigerated Sampler Instrument Manual

Page 28

Setting Up the Bottles

8990hrd.fm

Section 2

For four-bottle sampling, install the distributor and place all four bottles in the

tray as shown in Figure 11.

Figure 10 Two-bottle Locations

Figure 11 Four-bottle Locations

2.5.3 Eight-, 12-, or 24-bottle Sampling

For eight-, 12- or 24-bottle sets, install the distributor (refer to section 2.6.1 on

page 30). Place the bottles in the tray and install the proper bottle retainer

(Figure 12).

Bottle #1 is the first bottle clockwise (looking down on the tray) from the right

side of the tray. Bottle #1 is located on the inside of each bottle tray for all

multiple bottle sets (Figure 12).

1. Single Bottle Location 2. Two Bottle Location 3. Slots for Wire From Bottle Tray (8 or 24 bottle)

1. 1, 2, or 4 Bottle Locations 2. Slot for Wire From Bottle Tray (8 or 24 bottles)

Front