Sigma 900 MAX Refrigerated Sampler Instrument Manual

Page 37
8990startup.fm Basic Programming Setup
Section 3 Basic Programming Setup
3.1 Initial Power-Up of Sampler
After pressing the ON key, the sampler performs a complete diagnostic test
and displays the menu shown when the unit was last turned off. Set the
instrument programming features when the Main Menu is displayed. The Main
Menu is the starting point for all programming operations. The Main Menu
offers four choices:
• Setup—Basic and Advanced Sampling programming
• Status—Lists all current sampling status, power supply voltage, and
values of any data channels that are enabled.
• Display Data—Shows graphs and tables of logged data
(Displaying Data on page 113)
• Options—Optional Device Programming
Setup and Option functions lead to sub-menus and will configure the basic
and advanced features of the sampler. Refer to the Quick Start Guides on
page 105. The Display Data and Status Menus lead to sub-menus and will
provide information only. Press
STATUS to display any data channels that have
enabled logging (flow, pH, temp., etc.)
3.2 Basic Programming Setup
Basic programming setup must be performed, step-by-step and in its entirety,
after the instrument is installed. Refer to the Quick Start Guides on page 105
for more information. The basic program setup will modify the following items:
In addition, several advanced sampling features are found on a sub-menu
called Advanced Sampling. Refer to section 3.3 on page 49 for Advanced
Sampling Basic Programming Setup.
11:00 AM 21 - APR - 01 * MAIN MENU*
DISPLAY DATA SETUP
OPTIONS STATUS
READY TO START
• Bottles • Intake Tubing
• Program Lock • Program Delay
• Sample Collection • Sample Distribution
• Liquid Sensor • Sample Volume
• Intake Rinses • Sample Retries
• Site ID