Sigma 900 MAX Refrigerated Sampler Instrument Manual

Section 3
Page 45
8990startup.fm Basic Programming Setup
f. In the Collection Period menu use the numeric keypad to enter the
time period for collecting samples.
g. Press
ACCEPT to continue to Sample Distribution.
Step 6 - Sample Distribution
Sample distribution describes the way samples are deposited in a bottle(s).
Several bottle combinations are available with the sampler (Figure 10 on
page 24). Sample distribution is deposited into a single bottle or multiple
bottles. Multiple bottle applications use a distributor arm to automatically aim
the sample intake tubing into the proper bottle. Multiple bottle sets deliver
each sample to all bottles or deliver each sample into individual bottles or a
subset of bottles.
Single Bottle
6-A. Select either Stop After Last Bottle or Run Continuously Stop After Last
Bottle mode stops the program when the sample is deposited into the
last bottle. Run Continuously mode continues running until it is
manually stopped.
6-B. Press
ACCEPT to continue to Liquid Sensor setup.
Multiple Bottle Sets
Multiple bottle applications use a distributor arm to automatically aim the
sample intake tubing into the proper bottle. Multiple bottle sets deliver each
sample to all bottles or deliver each sample into individual bottles or a subset
of bottles.
6-A. Select
YES or NO for Deliver Each Sample to All Bottles.
11:00 AM 21 - APR - 01 CONST TIME/ VAR VOL
ACCEPT COLLECTION PERIOD
0:30 (hrs:min)
CANCEL
CLEAR
ENTRY
ENTER: 000:01—999:00 (hrs: min)
11:00 AM 21 - APR - 01 SAMPLE DISTRIBUTION
ACCEPT
RUN MODE:
CHANGE
CHOICE
RUN CONTINUOUSLY
CANCEL
CHOICES: CONTINUOUS, STOP AFTER LAST
11:00 AM 21 - APR - 01 SAMPLE DISTRIBUTION
ACCEPT
DELIVER EACH SAMPLE TO
ALL BOTTLES?
CHANGE
CHOICE
CANCEL NO
CHOICES: YES, NO