User manual

Standard Operations

5.2.2 Sample ID

Use this option to enter up to 100 Sample Identification tags (up to

13 characters each) into the instrument. Sample IDs can be used to

specify the sample location or other sample specific information.

1. Press Sample ID in the Instrument Setup.

2. Press New to enter a new Sample ID.

3. Use the alphanumeric keypad to enter a new Sample ID.

Note: If a USB Barcode handset scanner ( see Section 9 on page 119)

is connected, Sample IDs can also be scanned. Sample IDs can also

be entered with a USB keyboard.

4. Press OK to confirm.

5. To number the Sample IDs sequentially (e.g. Inflow (01 etc.)),

select Add Number.

• Use the arrow keys to specify the first number of the

sequence.

• Use the key between the arrow keys to enter the first

number of the sequence using the alphanumeric keypad.

6. Press OK to return to "Instrument Setup".

7. The Sample ID is activated. Each Sample ID is automatically

numbered in ascending order after a measurement. The

number is shown in parentheses behind the Sample ID.

Note: To remove a Sample ID, highlight the ID and press Delete.

Note: A Sample ID can be entered or changed in measurement mode. In

the results screen, press Options>More>Instrument Setup. If a Sample

ID is already assigned, select the Sample ID symbol in the results screen.