User manual

Advanced Operations

Enter the next calibration formula (C2 or Cn)

1. Highlight C2: Off and press Edit.

2. Select C2: Off again and press Edit. The display switches to

C2: On.

3. Highlight the next line C2 = to define the formula and press

Edit.

In addition to the keys described in Table 11, only one other

function is available:

+–

÷x

Press +– ÷x, to enter a mathematical operation.

Select the operation and press OK to confirm.

The available choice of mathematical operations

depends on the defined formula.

This means that functions such as "( )" or "ln"/"log" etc.

are only active if a term in parentheses or the calculation

of a logarithm is mathematically permissible in the

defined formula (this also applies to the basic

mathematical operations).

The following mathematical operations are available:

• + (Addition)

• – (Subtraction)

• ÷ (Division)

• x (Multiplication)

• ^ (Exponent)

• Ln (Natural logarithm)

• Log (Common logarithm)

>=<

Press >=< to include logic statements/links/conditions in

the formula. The following functions are available:

= (Equal to), < (Less than), > (Greater than), <= (Less

than or equal to), >= (Greater than or equal to), IF,

THEN, ELSE

When the evaluation formula C1 has been entered

completely, press OK to confirm. Press OK again to

return to the Formula display.

When the formula C1 has been entered and confirmed,

the parameter name, upper and lower limits of the

measuring range and display result (yes, no) can be

entered.

Table 11 Edit formula key descriptions (continued)

Screen Key Description