Operation Manual

66
Inserting the Battery and the SIM Card4.
To protect the battery during transport it is
not inserted in the mobile telephone. In case
the dealer from whom you purchased the tel-
ephone has not already inserted the battery,
follow the following steps.
Remove the battery cover on the back side 1.
by sliding it to the case‘s base.
Put the battery in the battery slot 3 metal 2.
contact points towards back and be in line
with the metal bolts at the bottom line of the
cell phone, ensuring the battery‘s 3 metal
contact points are in close alignment with
the 3 metal bolts of the cell phone.
hagenuk fono e100.indb 66 25.10.2009 12:19:37 Uhr