Installation Template
1 11/16"
43
2 1/4"
57
17/32"
13
1 3/8"
35
R
7/32"
4 PLACES
6
1448 STRIKE
(2) C"SUNK FOR
#6 FHWS
1 5/32"
29
23/32"
18
3/8"
9
1/16"
1
3/32"
3
20°
Y
3/4" [19]
3/16"
5
FRAME STOP
DRILL & CHISEL OUT THIS AREA
OF THE FRAME 1/8"[3] DEEP TO
MAKE ROOM FOR CUP OF STRIKE
DRILL (2) 3/8"[9.5] DIA CLEARANCE
HOLES 1/8"[3] DEEP IN FRAME FOR
C'SUNK AREA OF STRIKE
C
L
C
L
CHOOSE HEIGHT AT WHICH TO MOUNT STRIKE ON FRAME.
1.
MAKING SURE THE CURVED LIP FACES OUT, MARK AN OUTLINE OF THE STIKE AND
2.
THE CENTER OF THE SCREW HOLES WITH A PEN. (USE FORMULA BELOW TO
DETERMINE WHERE THE STRIKE SHOULD BE PLACED.)
MORTISE THIS AREA ON THE FRAME 1/16"[3] DEEP, OR UNTIL STRIKE SITS FLUSH. (SEE
3.
FRAME PREP PICTURE BELOW FOR MORE DETAILS ON PROPERLY PREPPING THE
FRAME FOR A FLUSH FIT.)
DRILL
1/16"[1.5] PILOT HOLES 1"[25.4] DEEP FOR SCREWS.
4.
ATTACH STRIKE USING (2) #6 SCREWS.
5.
NOTES:
DIMENSION Y = 1/2(DOOR THICKNESS) + 1/8"
1.
DIMENSIONS IN [ ] ARE IN MILLIMETERS
C
L
LATCH
C
L
HAGER COMPANIES
139 Victor Street, St. Louis, MO 63104 - (800) 325-9995 - Fax (800) 782-0149
1448 STRIKE INSTRUCTIONS
SHEET 1 OF 1
DRAWING NO: I-TA00095
REV: 01