Specification Sheet

For more inform at i on vi s i t For more inform at i on vi s i t www. h agerco.comwww. hagerco. com
190S
Door Protection Plate
0.050" gauge with no bevel
NFPA Notes:
- NFPA 80 Standards
- 6.4.5 Protection Plates 6.4.5.1
- Factory installed protection plates shall be installed in accordance with
the listing of the door. 6.4.5.2
- Field installed protection plates shall be labeled and installed in
accordance with their listing. 6.4.5.3
- Labeling shall not be required where the top of the protection plate is not
more than 16" (406mm) above the bottom of the door.
PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS
GAUGE:
- 0.050" (1 mm)
MATERIALS:
- Aluminum, Brass, Bronze, Stainless Steel
FINISHES:
- US3, US4, US10, US10B, US28, US32, US32D
BEVEL:
- None
ORDER:
- Furnish item #, height, width, and finish (i.e., 190S – 6'' x 30'', US32D).
- Plates are sized on even inches. Odd size available and priced to next larger
size.
- May be ordered with counter sunk holes (specify "CSK") at extra charge.
OPTIONS:
- UL listed for US32 and US32D with screw fasteners (must specify UL stamp)
- Self-adhesive tape available on all plates
- Spanner head screws
- Torx head screws
- Round corners
- Wrap around side and bottom return
- 0.125" material
CERTIFICATION:
- Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103
Metal Mop Plate
PRODUCT SIZE OPTIONS
ITEM
#
B&S
GAUGE
US
GAUGE
BEVEL FASTENERS
QUANTITY
BAG
QUANTITY
CASE
190S 16 18 none
#6 x 5/8 truss head
screws
1 each - - -
193S 16 18 B3E
#6 x 5/8 truss head
screws
1 each - - -
194S 16 18 B4E
#6 x 5/8 truss head
screws
1 each - - -
196R 16 18 none
#6 x 5/8 truss head
screws
1 each - - -
198S - - - 20 none
#6 x 5/8 truss head
screws
1 each - - -
199B - - - 38 none
#6 x 5/8 truss head
screws
1 each - - -
220S 14 16 none
#6 x 5/8 truss head
screws
1 each - - -
223S 14 16 B3E
#6 x 5/8 truss head
screws
1 each - - -
224S 14 16 B4E
#6 x 5/8 truss head
screws
1 each - - -