Specification Sheet

1/8"
MORTISE
3.2
1"
MORTISE
25.4
2 5/16"
MORTISE
58.7
1"
25.4
FLOOR
2 29/32"
MORTISE
73.8
2 1/4"
57.2
1 7/16"
MORTISE
36.5
W/ PLASTIC ANCHOR
#8 x 1" FPHW (2x)
HOLE (2x)
SPANNER WRENCH
3/4"
PLUNGER
18.8
1 1/4"
31.9
FACEPLATE
(REMOVABLE)
1"
MORTISE
25.4
NUT THRESHOLD
FLOOR
C
L
C
L
STANDARD MORTISED
FLOOR MOUNTING
OPTIONAL THRESHOLD MOUNTING
(FACE PLATE REMOVED)
C
L
C
L
FLOOR MORTISE
STYLE
THRESHOLD
STYLE
FLOOR MOUNTING:
DRILL 1"[25.4] HOLE 2-5/16"[58.7] DEEP IN FLOOR. (USE 1.
INSTALLED FLUSHBOLT TO MARK LOCATION FOR THE
1"[25.4] HOLE IN THE FLOOR
PLACE STRIKE OVER DRILLED HOLE AND MARK 2.
OUTLINE OF FACEPLATE ON THE FLOOR.
MORTISE FLOOR 1/8"[6.3] DEEP FOR FACEPLATE. 3.
MARK AND DRILL HOLES FOR PLASTIC ANCHORS, 4.
INSERT PLUGS INTO THE HOLES.
THREAD FACEPLATE ONTO THE BODY OF THE DUST 5.
PROOF STRIKE.
INSTALL COMPLETE STRIKE INTO THE 1"[25.4] HOLE 6.
AND SCECURE FACEPLATE USING (2) #8 SCREWS.
THRESHOLD MOUNTING:
USE INSTALLED FLUSHBOLT TO MARK LOCATION FOR 1.
THE 1"[25.4] HOLE IN THE FLOOR.
TEMPORARILY LAY THRESHOLD IN PLACE ON THE 2.
FLOOR AND MARK THE LOCATION FOR THE 1"[25.4]
HOLE USING INSTALLED FLUSHBOLT.
DRILL 1"[25.4] HOLE 2-5/16"[58.7] DEEP IN FLOOR. 3.
DRILL 1"[25.4] HOLE THRU THE THRESHOLD. 4.
SLIDE DUST PROOF STRIKE THROUGH THE DRILLED 5.
HOLE IN THE THRESHOLD HOLE AND TIGHTEN USING
THE SUPPLIED NUT. (TIGHTEN TO A SNUG FIT)
INSTALL THRESHOLD. 6.
NOT TO SCALE
NOTES: HAGER RESERVES THE RIGHT TO MAKE PART CHANGES AND IS NOT RESPONSIBLE FOR OBSOLETE DREAWING
ERRORS. TO ENSURE YOUR DRAWING IS CURRENT VISIT WWW.HAGERCO.COM
DIMENSIONS IN [ ] ARE IN MILLIMETERS
280X DUST PROOF STRIKE
FLOOR & THRESHOLD PREP TEMPLATE
SHEET 1 OF 1
HAGER COMPANIES
139 Victor Street, St. Louis, MO 63104 - [phone] - Fax [phone]
REV: 03 DRAWING NO: T-TA00179 SHEET 1 OF 1
HAGER COMPANIES
139 Victor Street, St. Louis, MO 63104 - [phone] - Fax [phone]
TEMPLATE NO: T280X