Specification Sheet

ManualsBrandsHager ManualsDeadboltsHager Single Cylinder Grade 1 Deadbolt from the 3100 Collection

3100 Series

Description: Deadbolts > 3100 Series - Grade 1

Applications - Auxiliary and primary locking Door Thickness - 1-3/4" (45 mm) - 2" (51 mm)

- Cylinder Hole: 2-1/8'' (54 mm) Diameter (Cross

Bore)

- Latch Hole: 1'' (25.4 mm) Diameter (Edge Bore) Backset - 2-3/4'' (70 mm)

- 2-3/8'' (60 mm) - Optional

Certifications - BHMA Certified ANSI A156.5 Grade 1

- ANSI A250.13 Severe Windstorm Resistant

Component

Latchbolt - 1'' (25.4 mm) Throw-Brass with concealed

hardened steel roller to prevent sawing or

cutting

- UL/cUL Listed for all functions up to 3 hours - 2-1/4'' (57 mm) x 1-1/8'' (29 mm) Square Corner

Faceplate

- UL10B Neutral Pressure Rated

- UL10C/UBC 7-2 (1997) Positive Pressure Rated Strikes - 3930 Square Corner, 1-1/8'' x 2-3/4'' (70 mm)

with dustbox - Standard

- 3929 ASA Deadbolt Strike - Optional

Exposed Trim - Brass or Bronze

Functions - 14 Double Cylinder

Mechanism - Steel, zinc plated and dichromated - 15 Single Cylinder

- 18 Classroom

Keys - Two brass keys per lock

Cylinders - Brass 6-pin - Keyed Different - C Keyway

- Other keying options available from the factory

- Interchangeable Core - Brass 6 or 7 pin -

uncombinated and combinated - sold separately

Summary of content (10 pages)

PAGE 1
3100 Series Description: Deadbolts > 3100 Series - Grade 1 Applications Certifications - Auxiliary and primary locking - Cylinder Hole: 2-1/8'' (54 mm) Diameter (Cross Bore) - Latch Hole: 1'' (25.4 mm) Diameter (Edge Bore) - BHMA Certified ANSI A156.5 Grade 1 - ANSI A250.13 Severe Windstorm Resistant Component Door Thickness - 1-3/4" (45 mm) - 2" (51 mm) Backset - 2-3/4'' (70 mm) - 2-3/8'' (60 mm) - Optional Latchbolt - 1'' (25.
PAGE 2
LOCKS 3100 SERIES LOCKS HOW TO ORDER 3 3114 2 /8” US3 US26 SCC Interior Finish (if different) Function 14 - Double Cylinder 15 - Single Cylinder 18 - Classroom Finish US3 US4 US10 US10B US26 US26D Product Group 31 - Deadbolt, Grade 1 Backset/Faceplate 2-3/4” 2-3/4” 2-3/8” 2-3/8” Notes: 1.
PAGE 3
Hager Companies, Inc 139 Victor Street Saint Louis, MO 63104 HAGER TEST REPORT NO.: LS04014 EVALUATION OF Hager Companies 3100 Series Grade 1 Single Cylinder Deadbolt TEST PARAMETERS: This report covers tests and/or evaluations performed using the following standard(s) as a guideline: ANSI/BHMA A156.5-2001 American National Standard for Auxiliary Locks and Associated Products. Testing was conducted by Intertek Testing Services NA, Inc., at their Middleton, WI facility.
PAGE 4
ITEM FILE NAME NO. 1 S-LS00718 DESCRIPTION QTY. EXTERIOR THUMBTURN CYLINDER HOUSING - IC 1 1.
PAGE 5
ITEM FILE NAME NO. 1 S-LS00718 DESCRIPTION QTY. EXTERIOR DOUBLE CYLINDER HOUSING - IC 1 1.6 S-LS00606 TAILPIECE (2-639-7091) 1 2 S-LS00718 INTERIOR DOUBLE CYLINDER HOUSING - IC 1 2.
PAGE 6
ITEM FILE NAME NO. 1 S-LS00718 DESCRIPTION QTY. EXTERIOR THUMBTURN CYLINDER HOUSING - IC 1 1.
PAGE 7
ITEM FILE NAME NO. 1 S-LS00718 2 2.2 S-LS00617 S-LS00219 DESCRIPTION QTY.
PAGE 8
ITEM FILE NAME NO. 1 S-LS00718 2 S-LS00718 DESCRIPTION QTY. EXTERIOR DOUBLE CYLINDER HOUSING 1 INTERIOR DOUBLE CYLINDER HOUSING 1 3 S-LS00617 6-PIN DRILLED CYLINDER 1 3.3 S-LS00218 INTERIOR TAILPIECE (2-639-7006) 1 4 S-LS00617 6-PIN DRILLED CYLINDER 1 4.
PAGE 9
ITEM FILE NAME NO. 1 S-LS00718 2 2.2 S-LS00617 S-LS00219 DESCRIPTION QTY.
PAGE 10
The following products have been approved for statewide acceptance by the Florida Building Commission pursuant to Rule 9B72.090, F.A.C., for approval of products and systems for use on Exterior Swinging Door Assemblies, in compliance with the structural requirements of the 2007 Florida Building Code. Verification of Florida Statewide acceptance can be found at www.floridabuilding.org under the Product Approval section. Severe Windstorm Resistant Components for Swinging Door Assemblies ANSI A250.