MSDS

MATERIAL SAFETY DATA SHEET
SECTION I
MANUFACTURER’S NAMES
W. J. Hagerty & Sons, Ltd., Inc.
EMERGENCY TELEPHONE NUMBER
[phone]
ADDRESS (NUMBER, STREET, CITY, STATE AND ZIP CODE)
3801 West Linden Avenue
South Bend, Indiana 46619-1844
TELEPHONE NUMBER FOR INFORMATION
[phone]
[phone] Indiana Residents
PRODUCT NAME:
Hagerty Heavy Duty Copper, Brass, & Metal Polish
PRODUCT NUMBER:
21080
CHEMICAL NATURE:
Compounded Cleaner
DATE PREPARED
August 2010
SECTION II
ACTIVE INGREDIENTS
ACTIVE COMPONENTS:
OSHA PEL. ACGIH TLV.
(SPECIFIC CHEMICAL IDENTITY; COMMON NAME(S))
Colloidal Clay
15mg/m3 10mg/m3
Polyglycol
N/A N/A
Aqua Ammonia
N/A 25 ppm
Methyl Henzotriazole
N/A N/A
Aliphatic Hydrocarbon
N/A 200 ppm
Silica Dioxide (amorphous)
N/A 3.0 mg/m3
∗ Other active ingredients that may be included constitute 1.0% or less
SECTION III
PHYSICAL DATA
Boiling Point N/A Specific Gravity (H
2
O = 1) 1.0
Vapor Pressure (mm Hg.) N/A Percent Volatile, By Volume % 5%
Vapor Density (Air = 1) N/A Evaporation Rate (Butyl Acetate = 1) Negligible
Solubility in Water High Melting Point N/A
Appearance and Odor: Light Brown Liquid – ammonia odor
SECTION IV
FIRE AND EXPLOSION HAZARD DATA
Flash Point:
Flammable Limits:
LEL.: UEL.:
Non-flammable over 212 degrees None None
Extinguishing Media: Dry chemical, carbon dioxide, water fog or alcoholic foam.
Special Fire Fighting Procedures: None
Unusual Fire and Explosion Hazards: None
SECTION V
HEALTH HAZARD DATA
ROUTE(S) OF ENTRY:
INHALATION:
SKIN:
Skin contact would be the most likely mode of exposure under normal usage.
INGESTION: