Item Brochure

Haglöf Sweden AB Ph: [phone] [e-mail] www.haglofsweden.com. ©Haglöf Sweden 2016. All rights reserved
Haglöf caliper models the Mantax Black, the Digitech
Professional and the DP II can be equipped with Gator
Eyes laser pointers. The laser pointers are factory
assembled on the caliper jaws. Gator Eyes are used to
measure diameters and upper stem diameter from ground
level and from a distance. If you are working with a
Digitech Professional or DP II Gator Eyes caliper, you can
also measure inclination and tree diameters at certain
heights.
With the software run clinometer function you can select
to measure a diameter at a specic height, allowing you to
conveniently follow individual tree growth. The precision of
the software run clinometer function is user dependant and
around 0.2degrees. with a height precision of approx. 0.1m and a
resolution of 0.1 degrees.
Gator Eyes can be factory assembled/ordered on the Haglöf
Sweden caliper models Mantax Black, Digitech Professional and
DP II. Measurement results need to be adjusted with one inch/2.54
cm when using Gator Eyes. This adjustment can be automatically
(software) adjusted when using a Digitech Professional or DP
II computer caliper. For Gator Eyes that have been installed on
a Mantax Black mechanical caliper, the operator should refer to
the lower scale print “Laser” scale when reading diameter results
measured with Gator Eyes. The weight of the caliper will increase
with approximately 190g/7.6oz with Gator Eyes installed.
Gator Eyes Laser Pointers
The DP Accessories
• Use the Gator Eyes when you wish to
know diameters of trees from a distance,
upper stem diameter and branch size
without having to climb, carry long sticks
or heavy ladders in the eld.
• Gator Eyes is great when there are obsta-
cles to reach a tree, such as water streams
or wind throws.
• Gator Eyes increase the speed of your
measuring
• Combine the Gator Eyes with software run
clinometer function to measure and regis-
ter heights with your computer caliper
The green laser pointers in the factory assembled Gator Eyes have great visibility and allow you to work
in sunny areas and bright light. The Gator Eyes laser pointers are classied as Class II laser with a bright
and visible beam and a multi coated optical glass lens for a sharper dot at farther distances. Tested in
temperatures down to +5C/41F. Never point with laser at humans, animals or vehicles, and note that
restrictions on the use of laser pointers should be considered by operators before using!
Aim the two aligned laser pointers as if you were
actually at the stem – just pull the caliper jaws
apart until the laser points are positioned where
you need them to be. If you are working with the
DP II or Digitech Professional caliper, results
are read in your caliper display, registered with
the press of a button and securely stored in the
computer terminal. Gator Eyes laser pointers
and corresponding software can be used to
measure tree diameters at a preset height
with the inclinometer function. Note that all
functions are software application depending.
Image to the left shows Gator Eyes laser
pointers installed on a Digitech Professional
caliper.
TECHNICAL SPECIFICATION GATOR EYES
LASER CLASS II EC608251
AVOID EXPOSING EYES TO LASER BEAM
MAX OUTPUT < 1MW
WAVELENGTH 532 NM
Size (laser only):
123x21x23.5mm/4.84”x0.83”x1.04” ea
Operation: Pressure switch
Weight:
92g/3.25 oz incl battery
Battery:
2)CR123A Lithium battery
Temperature:
Tested down to +5°C/41°F
Wavelength:
532 nm
Housing:
Aluminum Alloy
Output:
<1mW
Dot size at 100m/yds:
60mm/2.25”
Lens:
Multi-coated optical glass lens
Laser:
Class II laser