Instructions

GB
Modus 600RT 17
Attaching to Camera
1. Attach the Speedlight
to the camera.
Slip the ash’s mounting foot
into the camera’s hotshoe all
the way.
2. Secure the Speedlight Push
the release button to rotate
the lock ring on the mounting
foot until it locks in position
to the right.
3. Detach the Speedlight:
a) Push the release button.
b) Rotate the lock ring to
the left until it is loosened.
c) Slide the speedlight off the
camera hotshoe
Power Management
Use the ON/OFF Power Switch to power the ash unit
on or off. Switch off if it will not be used for an extended
period of time. Set as a master ash, it will turn the
power off automatically after a certain period (approx. 90
seconds) of idle use. Pressing the camera shutter halfway
or pressing any ash button will wake up the ash unit.
Set as a slave ash, it will enter sleep mode after a certain
period (adjustable, 60 minutes by default) of idle use.
Pressing any ash button will wake it up.
Disabling Auto Power Off function is recommended
when the ash is used off camera. (C.Fn-APO)
Slave Auto Power Off Timer is set to 60 minutes by
default. Another option “30 minutes” is available. (C.Fn-
Sv APOT, Page 42)
b
a
c