Instructions
GB
18 Modus 600RT
Flash Mode - TTL Autoash
This ash has three ash modes: TTL, Manual (M), and
MULTI (Stroboscopic). In TTL mode, the camera and the
ash will work together to calculate the correct exposure
for the subject and the background. In this mode, multiple
TTL functions are available: FEC, HSS & second curtain
sync, modeling ash. These can be controlled with the
Modus 600RT or with the camera’s menu screen.
* Press < MODE > Mode Selection Button and three ash modes
will display on the LCD panel one by one with each pressing.
TTL Mode
Press < MODE > Mode Selection Button to enter TTL
mode. The LCD panel will display TTL.
• Press the camera release button halfway to focus. The
aperture and effective ash range will be displayed in
the LCD panel.
• When the shutter button is fully pressed, the ash will
re a preash which the camera will use to calculate the
correct ash output power the instant before the photo
is taken.
FEC: Flash Exposure Compensation
With FEC function, you can adjust the calculated level
from -3 to +3 in 1/3 stops. It is useful in situations where
minor adjusting of the TTL system is needed based on the
lighting environment.
Setting FEC:
1. Press Function Button
2 <
>. The
icon <
> and ash
exposure compensation
amount will be
highlighted on the LCD
panel.