Instructions
GB
Modus 600RT 31
Multiple Master Unit
You can use two or more cameras with master ash
units on each to change camera shooting while keeping
the same lighting setup (slave units) in wirelesss ash
photography.
M: Wireless Flash Shooting with
Manual Flash
This describes wireless using manual ash. You can shoot
with a different ash output setting for each slave unit
(ring group). Set all parameters on the master unit.
1. Setting the manual
ash mode to <M>
• Press Function Button
4 <
Gr
> to choose
the group
• Then press Function
Button 3 <
MODE
> to
set the <M> mode
2. Setting manual ash
output power
• Press Function Button
2 <
>. Turn the
Select Dial to adjust the
ash output of the group
• Press <SET> button to
conrm
3. Setting individual group
ash output power
4. Each group M (Master
speedlight) / A / B / C
can be set individually
to different power level
• Set any group to <--->
to turn the power of this
group
1. Setting <MULTI>
stroboscopic ash
• On the Master
Speedlight press
<MODE> button until
<MULTI> is displayed
• Turn the Select Dial to
adjust the ash output
power. Press <SET>
button to conrm
MULTI: Wireless shooting with
Multi repeating ash stroboscop-