Instructions

GB
Modus 600RT 33
1. Set master Unit
• Press the <
MODE
>
button and set the ash
mode to <
MASTER
> .
See Page 26
2. Set the ring group of
the slave units
• Operate and set the
slave units one by one
• Press Function Button
<
Gr
> to assign
the speedlight to group
<A>, <B> or <C>. See
3. Set the ash modes
• Set the ash mode of
each ring group by
the operation of the
master speedlight. See
Page 27
4. Set the ash output
and ash exposure
compensation amount
• While a ring group
is selected, press
Function Button 3 <
>
• Turn the Select Dial to
set the ash function
corresponding to
ash mode, and press
<SET> Button to
conrm
• When using the <M>
mode, set the ash
output power
• When using the <TTL>
mode, set the ash
exposure compensation
amount as required
• Repeat step 4 to set
the ash function of all
groups
• Press Function Button
4 to return to the
shooting-ready state