Instructions
GB
Modus 600RT 39
Catchlight Panel
With the catchlight panel, you can create a catchlight in
the subject’s eyes to add life to the facial expression.
ZOOM: Setting the Flash Coverage
and Using the Wide Panel
The ash coverage can be set automatically or manually.
It can be set to match the lens focal length from 20 mm
to 200mm. Also, with the built-in wide panel, the ash
coverage can be expanded for 14mm wide-angle lenses.
1. Point the ash head
upward by 90°
2. Pull out the wide panel.
The catchlight panel
will come out at the
same time
3. Push the wide panel
back in
• Push in only the wide
panel
• Follow the same
procedures as for
bounce ash
In Manual Zoom mode,
press the <ZM/C.FN>
button.
• Turn the Select Dial
to change the ash
coverage
• If <
A
> is displayed,
the ash coverage will
be set automatically
Pull out the wide panel
and place it over the ash
head as shown. The ash
coverage will then be
extended to 14 mm.
• The catchlight panel
will come out at the
same time. Push the
catchlight panel back in.
• The <ZOOM/C.FN>
button will not work.
• If you set the ash coverage manually, make sure it covers
the lens focal length so that the picture will not have a dark
periphery.
Using the Wide Panel