User Manual
5.Switch on HI-601VT decoder (Switch on the middle for data
out via wired connection and to the most right side for
wireless Bluetooth connection)
6.Connect the voice jack cable to the voice outlet from the
phone.
7.The HI-601VT A/D decoder start to decoding the Analog GPS
voice message into real-time GPS digital NMEA message.
8.On the decoder unit, connect the PS/II output cable or set up
Bluetooh connection to the display unit (such as smart
phone, PDA, laptopPC, desktopPC, etc.)
9.Using any standard NMEA mapping software, select the com
port, start GPS (just like using normal GPS receiver)
5
5
HI-601VT