User's Manual
Table Of Contents
- 1. Phone Introduction
- 1.1 Keypad Area
- 1.2Display
- 1.3 Install and remove battery
- 1.4 Install and remove SIM card
- 1.5 Battery charge
- 1.6 SAR
- 2. Function introduction
- 3. Menu operation
- 3.1 Information (need network support)
- 3.2 Call record
- 3.3 Phone setup
- 3.3.1 Ring setup
- 3.3.2 setting
- 3.3.3 call setting
- 3.3.3.1 Call transfer (need network support)
- 3.3.3.2 Wishful (need work support)
- 3.3.3.3 Call waiting (need work support)
- 3.3.3.4 Minute prompt
- 3.3.3.5 answer by press any key
- 3.3.3.6 automatic redialing
- 3.3.3.7 Automatic response
- 3.3.3.8 Fold response
- 3.3.3.9 Issue number of this phone (need network support)
- 3.3.4 Clock Set
- 3.3.5 Firewall
- 3.3.6 Safety Settings
- 3.3.7 Networ setting
- 3.3.8 setting at factory
- 3.4 environment setting
- 3.5 cassette
- 3.6 entertainment
- 3.7 WAP(need network support)
- 3.8 my document
- 3.9 STKservice
12
z Phonebook on phone (smart phonebook)
Every record in smart phonebook is called ‘Name card’. A name card can include
following information:
Name (40 bytes at most)
Number (a name card can include five numbers at most, type can be repeated.
Maximal length of every number is 21 bytes, where if number length is 21
bytes, first byte must be kept as ‘+’, the other 20 bytes can be “0-9”、“*”、“#”、
“w”、“p”.)
Default number type (If record of SIM card is copied or moved to phone,
number will be placed in this area)
Mobile
Office number
Home number
Fax number
Bp call number
E-mail (50 bytes at most)
Notes (50 bytes at most)
Post Address (50 bytes at most)
Post code (10 bytes at most)
Every name card (when user creats it) should include name (unnull), and must include a
piece of other information at least.
In phonebook of phone, you can group namecard. Groups have Default, Home, Friend,
Colleague, Society, Private (you can modify the name of group and corresponding group
icon). Different group can be distinguished by different ring.
2.6.1 Looking up
You can enter mixed list of phonebook of SIM card and phone by this menu. Firstly,
youcan input the front character of the name to bee looked or directly press [OK] to enter
list. If input character and it exists in list, list scrools to the first position that meets
requirements. Otherwise, display from the first one.
Use skill: press[Down] in stand-by state to enter phonebook list directly.