User's Manual
Table Of Contents
- 1. Phone Introduction
- 1.1 Keypad Area
- 1.2Display
- 1.3 Install and remove battery
- 1.4 Install and remove SIM card
- 1.5 Battery charge
- 1.6 SAR
- 2. Function introduction
- 3. Menu operation
- 3.1 Information (need network support)
- 3.2 Call record
- 3.3 Phone setup
- 3.3.1 Ring setup
- 3.3.2 setting
- 3.3.3 call setting
- 3.3.3.1 Call transfer (need network support)
- 3.3.3.2 Wishful (need work support)
- 3.3.3.3 Call waiting (need work support)
- 3.3.3.4 Minute prompt
- 3.3.3.5 answer by press any key
- 3.3.3.6 automatic redialing
- 3.3.3.7 Automatic response
- 3.3.3.8 Fold response
- 3.3.3.9 Issue number of this phone (need network support)
- 3.3.4 Clock Set
- 3.3.5 Firewall
- 3.3.6 Safety Settings
- 3.3.7 Networ setting
- 3.3.8 setting at factory
- 3.4 environment setting
- 3.5 cassette
- 3.6 entertainment
- 3.7 WAP(need network support)
- 3.8 my document
- 3.9 STKservice
16
you can until all are copied or capacity of SIM cards is full.
One name card in phonebook can have five number af most, the operation will copy all
numbers to SIM card, every number will occupy one record of SIM card. These records have
same name that is from the name field of name card.
In addition, if there is no number field in phonebook, jump over the record and copy next
redord.
2.6.7 Move all
It is similar with above copy all, but after copy, original record will be deleted.
To selected phonebook record, if the record include non-number field (such as e-mail,
record, address and post code field), these field will be kept. If selected smart phonebook
record only has number field, the record will be deleted after all correspondint fields are
moved to SIM cards.
2.6.8 Group set
To 6 group, you can change group name, or set the piture of the group.
2.6.9 Selection of storage position
if you select a kind of phonebook type (SIM card or phone), when you add new
numbers,they will be saved to the phonebook of the corresponding type.
2.6.10 IP service number
The function is used to store IP service number you input so that you can dial IP call but
need not to input again.
z Only after input IP service number is supported by registered operator, you can dial
normally.
z You can look or edit the number.
z When phone change new SIM cards, it will automatically clear all save IP service
number.
z Phone has no any check to the IP service you input, you need to confirm it is correct
by yourself.
2.6.11 Individual information
You can send, display, change and delect individual information of of phone owner here.
Change individual information
According to prompte, you can input different field here. If no, press [OK] to jump
directly.
Delete individual information